Browsing Texas A&M Engineering Experiment Station by Title

Now showing items 4640-4659 of 8496

    • Japanese Vision of Commissioning Process and Asian View 
      Nakahara, N. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2004)
      Building Services Commissioning Association, BSCA, has been established in Japan as an NPO in order to propagate the building commissioning, especially HVAC commissioning, process among building and building services ...
    • Joint-Frequency Bins versus Conventional Bin Weather Data in Analysis of HVAC System Operation 
      Jones, A.; Baltazar, J. C.; Claridge, D. E. (Energy Systems Laboratory (http://esl.tamu.edu), 2009-11)
      Often in simplified energy analysis the use of bin weather data is employed for a more time efficient and better organized analysis than using the full 8760-hour annual weather data. It has been suggested that joint-frequency ...
    • Journal Bearing Design Types And Their Applications To Turbomachinery. 
      Salamone, Dana J. (Texas A&M University. Turbomachinery Laboratories, 1984)
      A review of several different types of hydrodynamic journal bearings that are commonly found in turbomachinery is presented. Emphasis is placed on the key geometric design parameters of each type. The discussion covers ...
    • Journal Bearing Upgrade To Solve Reliability Issues In An Accessory Gearbox 
      Whalen, John K.; Aburto, Lorenzo (Texas A&M University. Turbomachinery Laboratories, 2010)
    • Journal Bearing Vibration and SSV Hash 
      DeCamillo, Scan M.; He, Minhui; Cloud, C. Hunter (Texas A&M University. Turbomachinery Laboratories, 2008)
      Peculiar, low-frequency, radial vibrations have been observed in various turbomachinery using tilt-pad journal bearings. Unlike discrete subsynchronous spikes that often indicate a serious problem, the vibrations are ...
    • Journey Towards Risk Based Process Safety 
      Bhupathi, Pranshanthi (Mary Kay O'Connor Process Safety Center; Texas &M University. Libraries, 2016)
      Over the years, there have been many technological advancements in the industry and a hugegrowth in terms of operating capabilities. Being among the fastest growing organisations, managing enterprise wide risk effectively ...
    • JOURNEYS OF PSM IMPLEMENTATION AT TAIWAN FPG 
      Liao, William (Mary Kay O'Connor Process Safety Center; Texas &M University. Libraries, 2017)
      Formosa Plastics Group (FPG) was found in 1955 as a small private company. Over time, through acquisitions and advanced growth, the company has now grown to its current size with total sales of 79 billion US dollars in ...
    • JSC Sustainability Engagement Strategy 
      Peterson, L. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2012)
    • Judge The Pump Hydraulic Design Through Numbers Before You Buy 
      Spring, Hans (Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1995)
      A few well established hydraulic design parameters define the internal quality of an impeller design. Becoming familiar with those parameters and understanding their limits will enable pump buyers to make better pump buying ...
    • Jumpstart Green Schools with Campus Eco-Audits 
      LaMotte, G. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2013)
    • Justification for Energy Efficient Motors 
      Buschart, R. J. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1981)
      This paper presents the results of a study of Energy Efficient (or EE) motors in NEMA frame sizes, (1-200 HP). It examines the economics of using EE motors for new motor requirements, as replacements for motors - instead ...
    • Justifying and Planning an Energy Monitoring System in an Existing Plant 
      Stublen, A. P.; Wellman, C. M.; Kell, S. A. (Energy Systems Laboratory (http://esl.tamu.edu), 1998-04)
      Many electrical distribution specialists are using power monitoring systems to improve the effectiveness of their facilities. Information from power monitoring systems can be used to minimize permanent investment, reduce ...
    • Justifying The Reinstallation And Upgrading Of Problem ANSI Pumps At An Operating Chemical Plant 
      Dolniak, Joseph F. (Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1995)
      Many facilities do not obtain the expected life out of ANSI and other centrifugal pumps, seals, and bearings that need to be obtained to be competitive in today’s market place. The analysis of this situation leads to two ...
    • Key Differences between Steam Turbines and Electric Motors as Main Compressor Driver in Olefins Plants 
      Jain, Rishav; Singh, Ayush (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)
      This study starts by presenting a typical ethylene plant which will act as the ‘base plant’ for this case study. Then, a ‘low�emission’ ethylene plant is introduced which employs a new cracker technology having ...
    • Key Differences in the Design of Piping Systems for Reciprocating and Centrifugal Pumps 
      Eberle, Kelly; Witkowski, Michelle; Newman, Tom (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2017)
    • Key Factors in Displacement Ventilation Systems for Better IAQ 
      Wang, X.; Chen, J.; Li, Y.; Wang, Z. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2006)
      This paper sets up a mathematical model of three-dimensional steady turbulence heat transfer in an air-conditioned room of multi-polluting heat sources. Numerical simulation helps identify key factors in displacement ...
    • Key Lessons from the ExxonMobil Baton Rouge Refinery Isobutane Release and Fire 
      Wingard, Mark (Mary Kay O'Connor Process Safety Center; Texas &M University. Libraries, 2017)
      United States Chemical Safety and Hazard Investigations Board
    • Keynote Speaker Presentation 
      Rosenfeld, A. (2007)
    • Kieffer Paper Mill's Recycled Fiber Mill and PSI Energy's High Efficiency Motors Plan 
      Myers, J. A. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1993-03)
      The needs of electricity consumers along with the utility industry are rapidly changing. Consumers want electricity to perform more functions, improve efficiencies and help lower the cost of production, all in an environmentally ...
    • Kilowatts From Waste Wood In The Furniture Industry 
      Nailen, R. L. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1981)
      In a typical furniture factory, up to 70% of all incoming lumber ends up as useless waste. Though burnable, its enormous volume far exceeds the fuel needs of the plant's steam supply system. The excess must go to scarce, ...