Now showing items 4098-4117 of 7409

    • Key Differences in the Design of Piping Systems for Reciprocating and Centrifugal Pumps 

      Eberle, Kelly; Witkowski, Michelle; Newman, Tom (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2017)
    • Key Factors in Displacement Ventilation Systems for Better IAQ 

      Wang, X.; Chen, J.; Li, Y.; Wang, Z. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2006)
      This paper sets up a mathematical model of three-dimensional steady turbulence heat transfer in an air-conditioned room of multi-polluting heat sources. Numerical simulation helps identify key factors in displacement ...
    • Keynote Speaker Presentation 

      Rosenfeld, A. (2007)
    • Kieffer Paper Mill's Recycled Fiber Mill and PSI Energy's High Efficiency Motors Plan 

      Myers, J. A. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1993-03)
      The needs of electricity consumers along with the utility industry are rapidly changing. Consumers want electricity to perform more functions, improve efficiencies and help lower the cost of production, all in an environmentally ...
    • Kilowatts From Waste Wood In The Furniture Industry 

      Nailen, R. L. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 1981)
      In a typical furniture factory, up to 70% of all incoming lumber ends up as useless waste. Though burnable, its enormous volume far exceeds the fuel needs of the plant's steam supply system. The excess must go to scarce, ...
    • Know Your Turbomachinery’s Operating Environment! 

      Linden, David (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018)
      Not accounting for detrimental environment factors in the design and environment degradation are two of the most common causes of Turbomachinery component failures. This paper discusses the importance of knowing the operating ...
    • Knowledge-Based Tool Development And Design For Reciprocating Compressors. 

      Howard, Brian F.; Kocur, John A. (Texas A&M University. Turbomachinery Laboratories, 2009)
      Condition monitoring data collection capabilities have grown over the last decade in large part due to advances in integrated circuits (IC). These advances now permit real time thermodynamic and process calculations on ...
    • Laboratory Air Handling Unit System 

      Cui, Y.; Liu, M. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2001)
      An innovative AHU system is presented in this paper. The proposed AHU system is called a Laboratory Air Handling Unit (LAHU) system since it is most suitable for the buildings where one section (laboratory) has 100% exhaust ...
    • Laboratory Heat Recovery System 

      Burrows, D. B.; Mendez, F. J. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 1981)
      In 1976 Continental Oil Company (now Conoco, Inc.) made a far reaching decision. Looking at the future needs of the country in the energy field, it decided to increase and improve its research and development facilities ...
    • Labs21: Improving the Environmental Performance of U.S. Laboratories 

      Mathew, P. (Energy Systems Laboratory (http://esl.tamu.edu), 2003-05)
      The Laboratories for the 21st Century (Labs21) program is a voluntary partnership program sponsored by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) to improve the environmental performance ...
    • Lady Bird Johnson Middle School 

      Scrivner, J. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2014)
    • Large Adjustable Speed Drives And Their Application To A High Speed Centrifugal Compressor 

      LeMone, Charles P. (Texas A&M University. Turbomachinery Laboratories, 1981)
      New applications are being found for adjustable speed drives due to: 1) the availability of high current solid-state devices, 2) a simplified inverter design with large scale integrated circuits (LSI), and 3) because of ...
    • Large Converter-Fed Adjustable Speed AC Drives For Turbomachines. 

      Grgic, Andrej; Heil, Werner; Prenner, Herbert (Texas A&M University. Turbomachinery Laboratories, 1992)
      Converter-fed adjustable speed electric motors are now finding increasing use for driving turbomachinery in the power range from 1.0 to 20 (50) MW. The most important properties of these drives are explained, with the main ...
    • Large Cooling Water Pump Upgrade for Increased Capacity And Reduced Impeller Cavitation 

      Visser, Frank (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018)
      This case study discusses the hydraulic upgrade of two sets of four (25 percent) large vertical cooling water pumps. To increase the electrical output of subject power station, the cooling water pumps of block 1 and 2 had ...
    • Large Field Erected and Packaged High Temperature Water (HTW) Generators for Coal Firing 

      Boushell, C. C. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 1980)
      The purpose of the paper is to disseminate information on the energy savings possible with High Temperature Water (HTW) for heating and industrial process application and to provide information on coal fired HTW generator ...
    • Large Gearbox Vibration Monitoring Techniques 

      Ramsekar, Dakshina Murthy; Muchaweck, Franz (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
    • Large High Pressure Centrifugal Compressors For Oxygen Service 

      Geiser, Kenneth W. (Texas A&M University. Gas Turbine Laboratories, 1976)
      Centrifugal compressors have been used to compress oxygen for at least 25 years. Until ten years ago, the flows were relatively small and discharge pressures were relatively low. In the mid 1960's the size of single train ...
    • Large Motor Installation And Startup. 

      Miller, William H. (Texas A&M University. Turbomachinery Laboratories, 1993)
      The installation tasks and startup considerations necessary to commission large electric motors are discussed. The tasks are discussed in the usual installation sequence, but some series of tasks may need repetition if the ...
    • Large Motor Specification and Selection 

      Miller, William H. (Texas A&M University. Turbomachinery Laboratories, 1988)
      The induction motor has been the work horse of industry for many years. It has achieved this position by virtue of its ruggedness, and relative low cost. Induction motors include the popular squirrel cage and the versatile ...