Now showing items 3531-3550 of 7296

    • IAQ in Hospitals - Better Health through Indoor Air Quality Awareness 

      Al-Rajhi, S.; Ramaswamy, M.; Al-Jahwari, F. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2010)
      Quality air is fundamental to people's health and well-being. Indoor air quality is an important issue from both a social and economic point of view. Continual advances in medicine and technology necessitate constant ...
    • IBM and Energy Efficiency: Energy Managemnt Systems 

      Veilleux, Y. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2013)
    • IBM and Energy Efficiency: Systems Recommisiong and Optimization 

      Veilleux, Y.; Boulianne, J. P.; Lefebvre, P. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2013)
    • IC3 Resnet Accreditation User's Guide 

      Haberl, J.S.; Liu, Z.; Malhotra, M.; Kim, H.; Yazdani, B.; Culp, C. (Energy Systems Laboratory (http://esl.tamu.edu), 2009-12)
      This document is intended to provide the users from the Residential Energy Services Network (RESNET) with information on the supporting materials for the RESNET Accreditation of International Code Compliance Calculator ...
    • ICI's Approach to Total Energy Savings on Ethylene Plants 

      Hindmarsh, E.; Boland, D. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1987-09)
      Recent technological developments have led to the creation of the rigorous simulation models for ethylene plants which can be run in concert with advanced, thermodynamic “pinch” procedures. This new approach enables ...
    • The Identification and Optimization of the HVAC Partial Subsystems in Intelligent Buildings 

      Zhao, Z.; Xiong, Y. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2004)
      This paper presents on modeling of outside air systems (OAS) and air condition systems (ACS) of intelligent buildings (IB). The open loop identification estimation method is adopted for uncorrelated noises between the input ...
    • Identification Of Bearing Housing Vibrations Of A Large Barrel Type Injection Pump And Their Analysis By Means Of The Finite Element Method 

      Lienau, Wolfram; Sandford, Peter; Deger, Yasar (Texas A&M University. Turbomachinery Laboratories, 2005)
      It should be an objective to predict bearing housing vibrations by means of finite element methods and avoid them in the design phase rather than to go in for corrective actions on the test bed or in the field. Bearing ...
    • Identification of Changes Needed in Supermarket Design for Energy Demand Reduction 

      Hill, F.; Edwards, R.; Levermore, G. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2012)
      Supermarkets use 3 percent of UK energy. To satisfy building regulations supermarket buildings are modeled in considerable detail. Lighting, occupancy, and small electrical energy impacts are included in this modeling. ...
    • Identification of Market Requirements of Smart Buildings Technologies for High Rise Office Buildings 

      Reffat, R. M. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2010)
      This paper reports the findings on the identification of market requirements of smart buildings technologies for high rise office buildings in Saudi Arabia including: levels of importance of smart building technologies for ...
    • Identification of Process Energy and Pollution Reduction Opportunities at DoD Industrial Facilities 

      Lin, M. C.; Northrup, J. I.; Smith, E. D. (Energy Systems Laboratory (http://esl.tamu.edu), 1997-04)
      Industrial facilities operated by the Department of Defense consume large amounts of energy and emit significant quantities of air pollutants. Recent Executive Orders issued by the President set goals for increased energy ...
    • Identification of R&D Needs Relating to the Mitigation of Fouling in Crude Oil Pre-Heat Trains 

      Polley, G. T.; Pugh, S. J. (Energy Systems Laboratory (http://esl.tamu.edu), 2002-04)
      Worrell & Price (at a paper presented at the Industrial Energy Technology Conference organised by Texas A&M University and held in Houston in May 2001) examined the potential of over 50 emerging energy efficient technologies ...
    • Identification of the Flow Resistance Coefficient and Validation of a Building Air Conditioning System 

      Hou, Z.; Lian, Z. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2006)
      The fundamental parameter that characterizes the hydraulic state of a water pipeline and largely determines the efficiency of the water-transport process is the hydraulic resistance coefficient (HRC). The actual values of ...
    • Identifying Efficiency Degrading Faults in Split Air Conditioning Systems 

      Terrill, T. J.; Brown, M. L.; Cheyne, R. W. Jr.; Cousins, A. J.; Daniels, B. P.; Erb, K. L.; Garcia, P. A.; Leutermann, M. J.; Nel, A. J.; Robert, C. L.; Widger, S. B.; Williams, A. G.; Rasmussen, B. P. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2013)
      Studies estimate that as much as 50% of packaged air conditioning systems operate in faulty conditions that degrade system efficiency. Common faults include: under- and over-charged systems (too much or too little refrigerant), ...
    • Identifying Energy Systems that Maximize Cogeneration Savings 

      Ahner, D. J. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1988-09)
      This paper discusses the maximizing of Regional Cogeneration Energy Savings utilizing various technologies and fuels within a given service region. A methodology is developed to establish the allocation of power to the ...
    • Identifying Opportunities for Industrial Energy Conservation 

      Hoffman, A. R. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 1981)
      The Energy Productivity Center of the Mellon Institute is engaged in a 2-year study to identify opportunities for improved U.S. industrial energy productivity. A distinguishing feature is the focus on energy services ...
    • Identifying Savings Opportunities 

      Chari, S. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1993-03)
      In this paper, guidelines for identifying energy savings opportunities in industrial plants are discussed. The analytical approach used in this discussion stems from the fundamental principle that the total energy into and ...
    • Identifying Steam Opportunity "Impact" Inputs for the Steam System Assessment Tool (SSAT) 

      Harrell, G.; Jendrucko, R.; Wright, A. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2004)
      The U.S. DOE BestPractices Steam "Steam System Assessment Tool" (SSAT) is a powerful tool for quantifying potential steam improvement opportunities in steam systems. However, all assessment tools are only as good as the ...
    • Identifying Water Savings in Industrial Operations 

      Theising, T. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2015)
    • The IEA/ECBCS/Annex 40 Glossary on Commissioning 

      Akashi, Y.; Castro, N.; Novakovic, V.; Viaud, B.; Jandon, M. (Energy Systems Laboratory (http://esl.tamu.edu)Texas A&M University (http://www.tamu.edu), 2004)
      International Energy Agency's (IEA) Energy Conservation in Building and Community Systems' (ECBCS) Annex 40 has developed a glossary of commissioning terms as one of the first commissioning tools produced within the annex. ...
    • If You Install A Pump Subsea, Leave Nothing To Chance 

      Bibet, Pierre-Jean; Quiox, Bernard (Turbomachinery Laboratory, Texas A&M University, 2012)
      In 2011, for the first time Hybrid Multiphase Pumps have been deployed on the seafloor. This was Offshore Angola, at 800m Water Depth, to ensure the full field development of Pazflor Deep Sea Project by pumping the viscous ...