Now showing items 48043-48062 of 121333

    • Tikhonov, Konstantin S.; Schwiete, Georg; Finkel'stein, Alexander M. (Physical Review B - Condensed Matter and Materials Physics, 2012)
    • Bakar Usman Nlazl, Abu; Zahld, Muhammad (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2013)
      Outline: •Problem statement •Compressor service overview •Description of sealing system •Problem description •Troubleshooting •Findings •Remedial Actions •Result •Q & A
    • Caruthers, Jerald Wayne (Texas A&M University. Libraries, 1971)
      An analysis of the noise in iodine was made. The spectral intensities were observed directly between 20 and 500 cps using a wave analyzer to provide the Fourier amplitudes. The spectral intensities between .025 and 10 cps ...
    • Jordan, Andrew N.; Ooi, C. H. Raymond; Svidzinsky, Anatoly A. (Physical Review A - Atomic, Molecular, and Optical Physics, 2006)
    • Denur, Jack Boaz (Texas A&M University, 1976)
      Not available
    • Hale, Ira David (1977)
      Measurement of a current dependent noise spectrum for a small volume of electrolyte is reported. The noise is greater in magnitude and has a frequency dependence different from that predicted by thermodynamic theory. The ...
    • Nagy, Paul (2014-11-17)
      Throughout the course of the American Society of Heating Refrigeration and Air Conditioning, data of refrigerant physical properties have been published in their Handbooks. However, this information is not constant, rather ...
    • Adamczyk, L.; Adkins, J. K.; Agakishiev, G.; Aggarwal, M. M.; Ahammed, Z.; Alekseev, I.; Alford, J.; Anson, C. D.; Aparin, A.; Arkhipkin, D.; Aschenauer, E.; Averichev, G. S.; Balewski, J.; Banerjee, A.; Barnovska, Z.; Beavis, D. R.; Bellwied, R.; Betancourt, M. J.; Betts, R. R.; Bhasin, A.; Bhati, A. K.; Bhattarai, P.; Bichsel, H.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Bordyuzhin, I. G.; Borowski, W.; Bouchet, J.; Brandin, A. V.; Brovko, S. G.; Bruna, E.; Bültmann, S.; Bunzarov, I.; Burton, T. P.; Butterworth, J.; Caines, H.; Calderón de la Barca Sánchez, M.; Cebra, D.; Cendejas, R.; Cervantes, M. C.; Chaloupka, P.; Chang, Z.; Chattopadhyay, S.; Chen, H. F.; Chen, J. H.; Chen, J. Y.; Chen, L.; Cheng, J.; Cherney, M.; Chikanian, A.; Christie, W.; Chung, P.; Chwastowski, J.; Codrington, M. J. M.; Corliss, R.; Cramer, J. G.; Crawford, H. J.; Cui, X.; Das, S.; Leyva, A. Davila; De Silva, L. C.; Debbe, R. R.; Dedovich, T. G.; Deng, J.; de Souza, R. Derradi; Dhamija, S.; di Ruzza, B.; Didenko, L.; Dilks, C.; Ding, F.; Dion, A.; Djawotho, P.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, C. M.; Dunkelberger, L. E.; Dunlop, J. C.; Efimov, L. G.; Elnimr, M.; Engelage, J.; Engle, K. S.; Eppley, G.; Eun, L.; Evdokimov, O.; Fatemi, R.; Fazio, S.; Fedorisin, J.; Fersch, R. G.; Filip, P.; Finch, E.; Fisyak, Y.; Flores, C. E.; Gagliardi, C. A.; Gangadharan, D. R.; Garand, D.; Geurts, F.; Gibson, A.; Gliske, S. (Physical Review C - Nuclear Physics, 2013)
    • Michaeli, K.; Finkel'stein, A. M. (Europhysics Letters (EPL), 2009)
    • Miller, B.; Keon, E. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1980)
      Chemical technology has been used successfully to solve many of the operational and emissions problems that result from burning coal. This paper describes the use of blended chemical flue gas conditioners to significantly ...
    • Van Riper, Donald Charles (Texas A&M University, 1964)
      Not available
    • Karpetis, Adonios N.; Ellis, Dean W.; Babbat, Yogesh; Benedict, Moble (United States. Patent and Trademark Office; Texas A&M University. Libraries, 2019-08-27)
      A fluid bearing includes a housing including an internal plenum disposed in the housing and an inlet in fluid communication with the plenum, wherein the inlet is configured to provide fluid to the plenum from an external ...
    • Mullen, J. F.; Sneyd, R. J. (Energy Systems Laboratory (http://esl.tamu.edu), 1985-05)
      Because of its unique ability to handle a wide variety of liquids and solids in an energy efficient and environmentally acceptable manner, fluid bed combustion is being increasingly applied to the utilization of waste ...
    • Kreeger, A. H. (Energy Systems Laboratory (http://esl.tamu.edu), 1986-06)
      The first industrial fluid bed waste heat boiler in the U. S. is operating on an aluminium melting furnace at the ALCOA Massena Integrated Aluminum Works in upstate New York. Waste heat from an aluminum melting furnace ...
    • Samurin, N. A. (Energy Systems Laboratory (http://esl.tamu.edu), 1979)
      Fluidic cat crackers using the catalyst regeneration cycle have significant power recovery potential. Typically, the regenerator takes the spent coked catalyst and burns off the coke in an air pressurized atmosphere. The ...
    • Narayanan, Shankar Bhaskaran (2012-10-19)
      It is common for an oil well to produce a mixture of hydrocarbons that flash when exposed to atmospheric pressure. The separation of oil and gas mixtures on site may prove expensive and lead to higher infrastructure and ...
    • Laine, Glen Arthur (Texas A&M University. Libraries, 1980)
      A study was made of arterial pressure, portal pressure, inferior vena caval pressure, hepatic interstitial pressure (implanted capsule technique), prenodal lymph flow, and the protein concentration in plasma and lymph in ...
    • Davis, J. V.; Haby, Vincent A.; Leonard, Allen T. (Texas A & M University. Libraries, 1985)
    • Abramovitz, Stanley (Texas A&M University. Gas Turbine Laboratories, 1972)
      The basic and practical design concepts of fluid film bearings as applied to turbomachinery will be discussed. The discussion will cover specific applications that are representative of a wide range of conditions that can ...
    • Zeidan, Fouad Y.; Herbage, Bernard S. (Texas A&M University. Turbomachinery Laboratories, 1991)
      Fluid film bearing technology is presented in this tutorial as it applies to turbomachinery equipment. The focus here is on the practical aspects of fluid film journal bearings, as opposed to theoretical analysis. Failure ...