Search
Now showing items 21-30 of 126
An explicit finite difference solution of the generalized equation for unsteady state heat transfer in solids with radiation at one boundary
(1965)
The numerical results of a theoretical investigation of an explicit finite difference solution of the generalized equation for unsteady state heat transfer in solids with radiation at one boundary are presented. Results ...
Photoelastic determination of geometry factors for spur gear teeth
(1965)
Geometry factors for spur gear teeth were determined using photoelastic models of 20° full depth involute spur gear teeth. Seven models w ere made representing gears having 20, 25, 30, 40, 60, 80, and 125 teeth respectively, ...
Investigation of stresses in a plate containing circular holes
(1964)
In this investigation, the magnitude and position of the maximum stresses, as well as the stress distributions (maximum sheading stress) of critical sections of large plates perforated by circular holes and subjected to ...
Numerical solution for the transient temperature field and thermoelastic stresses of a homogeneous spherical fuel element with variable surface heat transfer
(1970)
The purpose of this investigation was to determine the temperature distribution and thermoelastic stress distribution in a homogenous spherical element under transient conditions with internal heat generation and variable ...
A consistent first-order nonlinear shell theory
(1969)
A general nonlinear theory of shells is derived. The theory is valid for large extensions, shear and rotations. The large rotations of the shell are described in detail. The measures of bending deformation then are written ...
On stresses and deformations in anisotropic toriodal shells subjected to uniform internal pressure
(1968)
An analysis of a thin toroidal shell of circular cross section, constructed form a plane anisotropic material and subjected to uniform internal pressure, is conducted with the use of linear bending theory. The analysis ...
Cumulative damage under reversed transverse shear superimposed upon static tension
(1977)
Cylindrical specimens of 7075-T6 aluminum alloy were subjected to reversed shear stress and static mean stress to study the effect of mean static tensile stress on cumulative fatigue damage under reversed shear stress. The ...
The development of mixture injected surface-ignition engine
(1980)
The feasibility of igniting lean air-fuel mixture with a torch formed by injecting a stoichiometric mixture over a hot surface near the end of the compression stroke is explored and proved. Several variables affecting the ...
The influence of dust on the absorptivity of radiant barriers
(1993)
The purpose of this project was to model and quantify the increase of the absorptivity of radiant barriers caused by the accumulation of dust on the surface of radiant barriers. This research was the continuation of a ...