Search
Now showing items 1-10 of 18
An explicit finite difference solution of the generalized equation for unsteady state heat transfer in solids with radiation at one boundary
(1965)
The numerical results of a theoretical investigation of an explicit finite difference solution of the generalized equation for unsteady state heat transfer in solids with radiation at one boundary are presented. Results ...
Photoelastic determination of geometry factors for spur gear teeth
(1965)
Geometry factors for spur gear teeth were determined using photoelastic models of 20° full depth involute spur gear teeth. Seven models w ere made representing gears having 20, 25, 30, 40, 60, 80, and 125 teeth respectively, ...
Investigation of stresses in a plate containing circular holes
(1964)
In this investigation, the magnitude and position of the maximum stresses, as well as the stress distributions (maximum sheading stress) of critical sections of large plates perforated by circular holes and subjected to ...
A consistent first-order nonlinear shell theory
(1969)
A general nonlinear theory of shells is derived. The theory is valid for large extensions, shear and rotations. The large rotations of the shell are described in detail. The measures of bending deformation then are written ...
On stresses and deformations in anisotropic toriodal shells subjected to uniform internal pressure
(1968)
An analysis of a thin toroidal shell of circular cross section, constructed form a plane anisotropic material and subjected to uniform internal pressure, is conducted with the use of linear bending theory. The analysis ...
A study of combined heat and mass transfer by free convection from a controlled environment to a plate at -310°F
(1967)
An experimental study of heat and mass transfer in free convection from a controlled environment to a plate at liquid nitrogen temperature (-310°F) has been made. The temperature of the environment was varied from 36°F to ...
Radiant heat transfer between gray surfaces forming an enclosure
(1965)
An analytical investigation was made of the radiant heat transfer between the surfaces of a gray enclosure filled with a non-reacting gas considering all multiple reflections between the surfaces. The problem was developed ...
Heat transfer and pressure drop in triangular ducts
(1964)
Heat transfer and pressure drop characteristics were determinded for triangular ducts with apex angles of approximately 10°, 20° and 30° and corresponding flow passages of 2.74, 2.75 and 2.68 square inches. The ducts, ...
An investigation of the impact behavior of a rigid body
(1967)
Modern freeways require adequate lighting facilities, and in order to meet lighting requirements, light posts sometimes have to be located near the edge of the traffic lane. Single post sign standards and stop light posts ...