Search
Now showing items 1-10 of 13
Factors Affecting Oil Ring And Slinger Lubricant Delivery & Stability
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2014)
The choice of which lubrication strategy to apply for pump bearings has implications for both the short term characteristics exhibited by the bearings and their long term reliability. When lubricating rolling element ...
Monitoring Vibration and Other Critical Machine Conditions
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2017)
Investigations Into The Contamination Of Lubricating Oil In Rolling Element Pump Bearing Assemblies
(Texas A&M University. Turbomachinery Laboratories, 2000)
The use of rolling element bearings in pumps is standard practice. Of the many factors that affect their long-term performance, contamination in the bearing lubricating oil plays a major part. Of particular concern are ...
The Influence of Impeller Wear Ring Geometry on Suction Performance
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2016)
Wear rings are a necessary feature of an enclosed centrifugal impeller design. The purpose of the wear ring is to limit the leakage of fluid from the high pressure zone at the impeller outlet to the low pressure region at ...
Modification Of The Bb1 Pump Vibration Characteristics To Meet ISO 13709
(Turbomachinery Laboratory, Texas A&M University, 2011)
Influence Of Impeller Leading Edge Profiles On Cavitation And Suction Performance
(Turbomachinery Laboratory, Texas A&M University, 2011)
The cavitation behavior and suction performance of a pump are largely influenced by the geometry at the impeller eye. A number of geometric factors at the impeller eye have an influence on cavitation, such as, the inlet ...
Influence Of Impeller Suction Specific Speed On Vibration Performance
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2013)
The most commonly used hard limitation for pump suction specific speed is 11,000 (US units). This hard limit grew out of the recommendations from a 1982 reliability study by J.L. Hallam (Hallam 1982). Concomitant testing ...
Modification Of Bb1 Pump Vibration Characteristics To Meet ISO 13709 2nd Edition (API 610 11th) Limits
(Turbomachinery Laboratory, Texas A&M University, 2012)
Discussion Group P2/T2 Monitoring Vibration and Other Critical Machine Conditions
(Texas A&M University. Turbomachinery Laboratories, 2012)
Discussion Group P1/T1: Monitoring Vibration and Other Critical Machine Conditions
(Texas A&M University. Turbomachinery Laboratories, 2014)