Search
Now showing items 41-50 of 75
Analysis Methodology for Industrial Load Profiles
(Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1991-06)
A methodology is provided for evaluating the impact of
various demand-side management (DSM) options on industrial
customers. The basic approach uses customer metered load profile
data as a basis for the customer load ...
Electrical Cost Reduction Via Steam Turbine Cogeneration
(Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1991-06)
Steam turbine cogeneration is a well established technology
which is widely used in industry. However, smaller previously
unfeasible applications can now be cost effective due to the
packaged system approach which has ...
Mitigating Pollution Concerns through Process Integration Technology Steps
(Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1991-06)
With increasing concern to reduce the
emission of SOx, NOx and CO2, there is a
growing awareness of making most
industrial processes more energy
efficient. It is believed that this can
be achieved through collaborative ...
The Measured Energy Impact of Air Leakage on Frame Wall Systems
(Texas A&M University, 1991-05)
Infiltration is customarily assumed to increase the heating and cooling load of a building by an amount equal to the mass flow rate of the infiltration times the enthalpy difference between the inside and outside air - ...
Cooling Towers- Energy Conservation Strategies Understanding Cooling Towers
(Energy Systems Laboratory, 1991-06)
Cooling towers are energy conservation devices that Management, more often than not, historically overlooks in the survey of strategies for plant operating efficiencies. The utilization of the colder water off the cooling ...
Texas LoanSTAR Monitoring and Analysis Program: Report to the Monitoring and Analysis Review Committee, August 1991 (Volume I)
(Energy Systems Laboratory (http://esl.tamu.edu), Texas A&M UniversityDepartment of Mechanical Engineering, Texas A&M University, 1991)
The LoanSTAR program has now completed its second prototype year. This report is Volume I of a two volume set that documents the progress since the January 1991 MARC meeting. This first voume contains photocopies of the ...
Case History of Reapplication of a 2500 KW Steam Turbine/Gear Drive Generator
(Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1991-06)
In today' s equipment market more and
more projects are turning toward
existing equipment to justify a
project. New equipment's delivery time
and/or capital cost can keep a good
project "grounded".
In the turbomachinery ...
Cooperative Efforts to Introduce New Environmental Control Technologies to Industry- A Case Study for Brayton Cycle Heat Pump Technology
(Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1991-06)
New environmental control technologies
are rare, partly because it requires a very
large expenditure of money, people and
resources, and a commitment over an extended
period of time. The Brayton Cycle Technology
for ...
Operation of a Joint Utility/Industry Ambient Air Monitoring Program in the Houston Area
(Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1991-06)
The Houston Regional Monitoring Corporation
(HRM) is an association of more than 40 industrial
companies located in or near the Houston Ship Channel
area. Since 1981, HRM has operated one of the largest
EPA approved ...
Evaluating Utility System Operations Using APLUS
(Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1991-06)
The steam system at a recycled paper
fiberboard plant in Texas was evaluated
using APLUS. These simulations identified
inefficiencies in the current operation
and so suggested more efficient
alternatives. The information ...