NOTE: This item is not available outside the Texas A&M University network. Texas A&M affiliated users who are off campus can access the item through NetID and password authentication or by using TAMU VPN. Non-affiliated individuals should request a copy through their local library's interlibrary loan service.
Electronically controllable transmission line design for traveling wave array antenna feed network
dc.creator | Shin, Chang-Seok | |
dc.date.accessioned | 2012-06-07T23:18:35Z | |
dc.date.available | 2012-06-07T23:18:35Z | |
dc.date.created | 2002 | |
dc.date.issued | 2002 | |
dc.identifier.uri | https://hdl.handle.net/1969.1/ETD-TAMU-2002-THESIS-S547 | |
dc.description | Due to the character of the original source materials and the nature of batch digitization, quality control issues may be present in this document. Please report any quality issues you encounter to digital@library.tamu.edu, referencing the URI of the item. | en |
dc.description | Includes bibliographical references (leaves 65-67). | en |
dc.description | Issued also on microfiche from Lange Micrographics. | en |
dc.description.abstract | In this thesis, an electronically controllable transmission line (ECTL) is presented. By modulating the conductivity of a doped Si modulator in the ECTL, the wave propagation constant in the ECTL is controlled. Measured results show a phase change in the ECTL at a single frequency when non-zero bias voltage is applied. This ECTL is implemented in order to feed a traveling wave array antenna, which is composed of 8 aperture-coupled microstrip antenna elements. It is demonstrated that phase change in an ECTL feed line has applications as a traveling wave array antenna with beam steering. S-parameter measurements are presented which demonstrate phase change in an ECTL and main beam steering of an 8-element traveling wave array antenna. The design procedure for an aperture-coupled microstrip antenna with a specific input impedance at the resonant frequency and a matching circuit design for a traveling wave array antenna are discussed in detail. | en |
dc.format.medium | electronic | en |
dc.format.mimetype | application/pdf | |
dc.language.iso | en_US | |
dc.publisher | Texas A&M University | |
dc.rights | This thesis was part of a retrospective digitization project authorized by the Texas A&M University Libraries in 2008. Copyright remains vested with the author(s). It is the user's responsibility to secure permission from the copyright holder(s) for re-use of the work beyond the provision of Fair Use. | en |
dc.subject | electrical engineering. | en |
dc.subject | Major electrical engineering. | en |
dc.title | Electronically controllable transmission line design for traveling wave array antenna feed network | en |
dc.type | Thesis | en |
thesis.degree.discipline | electrical engineering | en |
thesis.degree.name | M.S. | en |
thesis.degree.level | Masters | en |
dc.type.genre | thesis | en |
dc.type.material | text | en |
dc.format.digitalOrigin | reformatted digital | en |
Files in this item
This item appears in the following Collection(s)
-
Digitized Theses and Dissertations (1922–2004)
Texas A&M University Theses and Dissertations (1922–2004)
Request Open Access
This item and its contents are restricted. If this is your thesis or dissertation, you can make it open-access. This will allow all visitors to view the contents of the thesis.