Show simple item record

dc.creatorSaavedra, Nestor Fernando
dc.date.accessioned2012-06-07T22:46:38Z
dc.date.available2012-06-07T22:46:38Z
dc.date.created1996
dc.date.issued1996
dc.identifier.urihttps://hdl.handle.net/1969.1/ETD-TAMU-1996-THESIS-S22
dc.descriptionDue to the character of the original source materials and the nature of batch digitization, quality control issues may be present in this document. Please report any quality issues you encounter to digital@library.tamu.edu, referencing the URI of the item.en
dc.descriptionIncludes bibliographical references: p. 100-104.en
dc.descriptionIssued also on microfiche from Lange Micrographics.en
dc.description.abstractA new technique for zone isolation in horizontal wells has been proposed. The new technique consists of three sequential stages: (i) setting a chemical wellbore plug in the horizontal section upstream of the zone to be isolated, (ii) spotting a gel just downstream of the wellbore plug and squeezing the gel into the zone to be isolated, and (iii) washing or drilling through excess gel and the wellbore plug to clean the borehole prior to production. The main objective of this research is to investigate the feasibility of setting a chemical wellbore plug in a horizontal wellbore. Two main problems associated with the wellbore plug were investigated: (a) method of placement of the plug so that slumping would not occur, and (b) selection and testing of chemicals that could be used to make wellbore plugs with sufficiently high holding pressures. Three chemicals, used in the oil industry for gas and/or water shut-off, were selected for the study. The commercial names of these chemicals were SEAL, PERMASEAL and TEXPLUG. Experimental apparatus were designed and constructed to study placement techniques and to measure the holding pressures of the wellbore plugs. The horizontal wellbore models consisted of PVC pipes internally lined with sand. The X-ray CT scanner was used to obtain cross-sectional images of the plug to help understand the shear mechanisms involved. The experimental results indicate that a plug could be placed in a horizontal wellbore with minimum slumping, if the plug is introduced into a viscous completion brine pill. For TEXPLUG, a suitable completion brine would contain 100,000 ppm NaCi and 4 lb/bbl CMC (carboxyl methyl cellulose). Further, results indicate that only TEXPLUG has a sufficiently high holding pressure (about 340 psi for 37 in. long, 1 in. I.D. plug) necessary for a wellbore plug. Based on experimental results, the proposed new isolation technique appears to be viable. However, further experimental studies are required, particularly to evaluate the effectiveness of the wellbore plug in conjunction with displacement of formation gels.en
dc.format.mediumelectronicen
dc.format.mimetypeapplication/pdf
dc.language.isoen_US
dc.publisherTexas A&M University
dc.rightsThis thesis was part of a retrospective digitization project authorized by the Texas A&M University Libraries in 2008. Copyright remains vested with the author(s). It is the user's responsibility to secure permission from the copyright holder(s) for re-use of the work beyond the provision of Fair Use.en
dc.subjectpetroleum engineering.en
dc.subjectMajor petroleum engineering.en
dc.titleChemical wellbore plug for zone isolation in horizontal wellsen
dc.typeThesisen
thesis.degree.disciplinepetroleum engineeringen
thesis.degree.nameM.S.en
thesis.degree.levelMastersen
dc.type.genrethesisen
dc.type.materialtexten
dc.format.digitalOriginreformatted digitalen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

This item and its contents are restricted. If this is your thesis or dissertation, you can make it open-access. This will allow all visitors to view the contents of the thesis.

Request Open Access