Search
Now showing items 21-30 of 37
Reciprocating Compressor Condition Monitoring.
(Texas A&M University. Turbomachinery Laboratories, 2007)
Technology for reciprocating compressor condition monitoring has been around since the 1950s. However until the last 15 years or so it seemed that only the pipeline companies spent much effort on this activity. Technology ...
Rotor Bearing Loads With Honeycomb Seals And Volute Forces In Reinjection Compressors.
(Texas A&M University. Turbomachinery Laboratories, 2007)
The calculation for unbalance response of a rotor starts by calculating the bearing load to provide the basis for the bearing stiffness and damping characteristics. Measurements in test rigs at a major Texas university ...
Case Study: Charge Compressor Turbine Vibration - Diagnostic/Risk Assessment
(Texas A&M University. Turbomachinery Laboratories, 2007)
Reducing downtime and sustaining high production rates are essential for companies to remain competitive. A 36MHP steam turbine experienced sudden high vibration. Through use of vibration analysis, selective external case ...
Gas Turbines And Turbocompressors For LNG Service.
(Texas A&M University. Turbomachinery Laboratories, 2007)
The international liquefied natural gas (LNG) trade is expanding rapidly. Projects are being proposed worldwide to meet the industry forecasted growth rate of 12 percent by the end of the decade. LNG train designs in the ...
Root Cause Analysis / Expander Intake Flange Stud Failure
(Texas A&M University. Turbomachinery Laboratories, 2007)
Effect of the Off-line Wash system for Gas Turbines Ruston TB5000 in high polluted conditions
(Texas A&M University. Turbomachinery Laboratories, 2007)
This work shows the effect of an Off-line wash system with water based on the case of 3 gas turbines Ruston TB5000 located in high polluted conditions like ashes in the ambient, high humidity and temperature. This research ...
Reliability and Performance Improvements to a Hydrogen Recycle Compressor
(Texas A&M University. Turbomachinery Laboratories, 2007)
The Evaluation of the Coefficient of Friction Used to Calculate Hub Slip Torque
(Texas A&M University. Turbomachinery Laboratories, 2007)
Advisory Committee / Turbomachinery Symposium (36th : 2007)
(Texas A&M University. Turbomachinery Laboratories, 2007)
Development Of A System For Lean, Prevaporized, Premixed Combustion.
(Texas A&M University. Turbomachinery Laboratories, 2007)
Dry low emissions (DLE) systems employing lean, premixed combustion have been successfully used with natural gas in combustion turbines to meet stringent emissions standards. However, the burning of liquid fuels in DLE ...