Search
Now showing items 11-20 of 43
Performance Loss Investigation Using Thermal Imaging
(Turbomachinery Laboratory, Texas A&M University, 2011)
An axially split, opposed impeller, high speed water injection pump ran well for several months. Head, capacity and efficiency started to degrade markedly, but the pump turned freely and was relatively smooth. It was ...
Root Cause Analysis On A Multistage Centrifugal Pump
(Turbomachinery Laboratory, Texas A&M University, 2011)
Modification Of The Bb1 Pump Vibration Characteristics To Meet ISO 13709
(Turbomachinery Laboratory, Texas A&M University, 2011)
Technical Assistance To The Manufacture, Construction, And Assembly Of Osorio-Canoas Oil Pipeline Flow Pumps
(Turbomachinery Laboratory, Texas A&M University, 2011)
This paper reports the experiences acquired through the modifications and improvements implemented in the manufacture, construction and assembly of the oil flow centrifugal pumps. A Brazilian oil pipeline pumping capacity ...
Submerged Pumps And Expanders With Magnetic Coupling For Hazardous Applications
(Turbomachinery Laboratory, Texas A&M University, 2011)
Presentation and discussion of a unique magnetic coupling design that has been developed for cryogenic service in liquefied gases that allows the submerged motor or generator to be isolated from the process fluid in a safe, ...
Solving Super-Synchronous Vibration On A Double Suction Pump
(Turbomachinery Laboratory, Texas A&M University, 2011)
The Elimination Of VOC Emissions From A Reciprocating Pump Stuffing Box
(Turbomachinery Laboratory, Texas A&M University, 2011)
Short Course P1 On An Introduction to Rolling Element Bearings
(Texas A&M University. Turbomachinery Laboratories, 2011)
Short Course P4 On Pump Hydraulics With a Minimum of Mathematics
(Texas A&M University. Turbomachinery Laboratories, 2011)
Influence Of Impeller Leading Edge Profiles On Cavitation And Suction Performance
(Turbomachinery Laboratory, Texas A&M University, 2011)
The cavitation behavior and suction performance of a pump are largely influenced by the geometry at the impeller eye. A number of geometric factors at the impeller eye have an influence on cavitation, such as, the inlet ...