Search
Now showing items 91-100 of 101
Wear Reducing Technology Newly Applied To Severe Pumping Services
(Turbomachinery Laboratory, Texas A&M University, 2011)
A U.S. Gulf Coast refinery had experienced accelerated internal wear of FCCU cycle oil pumps, often requiring entire case replacements. Compared to typical industry pump performance, run lengths were shorter, and cost per ...
Upgrading A Set Of Large Cooling Water Pumps With The Aim To Increase Capacity
(Turbomachinery Laboratory, Texas A&M University, 2011)
Fifteen Years Of Field Experience In LNG Expander Technology
(Turbomachinery Laboratory, Texas A&M University, 2011)
From the earliest days of gas liquefaction, the thermodynamic process advantage of employing cryogenic liquefied gas expanders in place of throttling valves was very well recognized. The available technology was unable to ...
A Guide To Gasketing Principles And Best Practices
(Texas A&M University. Turbomachinery Laboratories, 2011)
Leakage from static joints has been found to be a major contributor of emissions in many plants. With the collaboration from the world’s leading gasket manufacturers, the Gasket Division of the Fluid Sealing Association ...
Bearing Maintenance Practices To Ensure Maximum Life
(Turbomachinery Laboratory, Texas A&M University, 2011)
Rolling element bearings are a key contributor to pump operation. Pump users should know how to analyze bearing issues in the field. When basic analysis is not enough, technical support provided by the manufacturer of the ...
Bearing Failure On A Boiler Feed Water Pump
(Turbomachinery Laboratory, Texas A&M University, 2011)
ISO 13709 2nd Edition/ API 610 Eleventh Edition Highlights
(Turbomachinery Laboratory, Texas A&M University, 2011)
International standard ISO 13709:2009 (Identical), ANSI/API Standard 610: September 2010 “Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries” also referred to as ISO 13709 Second Edition / API Eleventh ...
Centrifugal Pumps For Co2 Applications
(Turbomachinery Laboratory, Texas A&M University, 2011)
There is a renewed interest in pumping CO2 in the liquid and supercritical states for many enhanced oil recovery (EOR), and new carbon capture and sequestration (CCS) projects. Referenced centrifugal technology currently ...
Short Course T6 On Large Engineered Motors, Generators and Variable Frequency Drive System Fundamentals for Mechanical Engineers
(Texas A&M University. Turbomachinery Laboratories, 2011)
Discussion Group P7 On Sealless Pumps
(Texas A&M University. Turbomachinery Laboratories, 2011)