Priority Based Switch Allocator in Adaptive Physical Channel Regulator for On Chip Interconnects
MetadataShow full item record
Chip multiprocessors (CMPs) are now popular design paradigm for microprocessors due to their power, performance and complexity advantages where a number of relatively simple cores are integrated on a single die. On chip interconnection network (NoC) is an excellent architectural paradigm which offers a stable and generalized communication platform for large scale of chip multiprocessors. The existing model APCR has three regulation schemes designed at switch allocation stage of NoC router pipelining, such as monopolizing, fair-sharing and channel-stealing. Its aim is to fairly allocate physical bandwidth in the form of flit level transmission unit while breaking the conventional assumptions i.e.its size is same as phit size. They have implemented channel-stealing scheme using the existing round-robin scheduler which is a well known scheduling algorithm for providing fairness, which is not an optimal solution. In this thesis, we have extended the efficiency of APCR model and propose three efficient scheduling policies for the channel stealing scheme in order to provide better quality of service (QoS). Our work can be divided into three parts. In the first part, we implemented ratio based scheduling technique in which we keep track of average number of its sent from each input in every cycle. It not only provides fairness among virtual channels (VCs), but also increases the saturation throughput of the network. In the second part, we have implemented an age based scheduling technique where we prioritize the VC, based on the age of the requesting flits. The age of each request is calculated as the difference between the time of injection and the current simulation time. Age based scheduler minimizes the packet latency. In the last part, we implemented a Static-Priority based scheduler. In this case, we arbitrarily assign random priorities to the packets at the time of their injection into the network. In this case, the high priority packets can be forwarded to any of the VCs, whereas the low priority packets can be forwarded to a limited number of VCs. So, basically Static-Priority based scheduler limits the accessibility on the number of VCs depending upon the packet priority. We study the performance metrics such as the average packet latency, and saturation throughput resulted by all the three new scheduling techniques. We demonstrate our simulation results for all three scheduling policies i.e. bit complement, transpose and uniform random considering from very low (no load) to high load injection rates. We evaluate the performance improvement because of our proposed scheduling techniques in APCR comparing with the performance of basic NoC design. The performance is also compared with the results found in monopolizing, fair-sharing and round-robin schemes for channel-stealing of APCR. It is observed from the simulation results using our detailed cycle-accurate simulator that our new scheduling policies implemented in APCR model improves the network throughput by 10% in case of synthetic workloads, compared with the existing round-robin scheme. Also, our scheduling policy in APCR model outperforms the baseline router by 28X under synthetic workloads.
Mahapatra, Sonali (2014). Priority Based Switch Allocator in Adaptive Physical Channel Regulator for On Chip Interconnects. Master's thesis, Texas A & M University. Available electronically from