Search
Now showing items 931-940 of 994
A photoelastic study of simply supported rectangular beams with holes on the vertical center lines and subjected to concentrated loads
(Texas A&M University, 1965)
Not available
A photoelastic study of simply supported rectangular beams loaded by a round pin located on the vertical center line
(Texas A&M University, 1965)
Not available
The Effect of Alternate Defrost Strategies on the Reverse-Cycle Defrost of an Air-Source Heat Pump
(Texas A&M University, 1988)
Not available
Identification of kinematic parameters using several models with experimental verification
(Texas A&M University, 1988)
Not available
Finite element analysis of a coiled composite tubular
(Texas A&M University, 1999)
This study presents the design and stress analysis of a composite tubular that can be coiled onto large spools for ease of storage and installation on offshore platforms. The tube is analyzed under working pressure and ...
Consolidation of aluminum 6061 powder by equal channel angular extrusion
(Texas A&M University, 1997)
Equal channel angular extrusion is a promising approach to obtaining full density in powder metallurgy applications. This method can impose large effective deformations through uniform shear strain. Aluminum alloy 6061 ...
Effect of unsteady wake passing frequency on boundary layer transition on the concave surface of a curved plate
(Texas A&M University, 1997)
The unsteady boundary layer behavior on the concave surface of a curved plate is investigated. Detailed experimental investigations are carried out to study the effect of unsteady wakes on the boundary layer transition ...
The development of an experimental procedure to determine the amount of active internal friction in a rotor-bearing system
(Texas A&M University, 1997)
This research presents a method to determine the active friction force in a free-free rotor. This method is based on Gunter's work in SP-1 13 and assumes that the active internal friction force is a function of bending ...
Evaluation of a slotted orifice plate flow meter using horizontal two phase flow
(Texas A&M University, 2000)
In the past several years, the slotted orifice plate has been evaluated for its performance as a single phase flow meter using air and as a two-phase flow meter using water and air. These previous studies have both shown ...
Numerical and experimental study on the effects of elbows upon the flow downstream
(Texas A&M University, 1998)
The seeds of elbows upon the flow downstream were graphics. studied experimentally and numerically. The flow field was calculated for five cases: through one elbow, through two elbows arranged to make an S bend in a single ...