Browsing by Subject "Design"

Now showing items 21-40 of 80

    • A design methodology for synthesizing low order robust controllers for flexible structures 
      Song, Byung-Keun (Texas A&M University. Libraries, 1992)
      In this research, a design methodology is developed for realizing low order robust controllers for flexible structures modelled as partial differential equations (PDEs). The efficacy of the methodology is illustrated by ...
    • Design of a Portable and Compact Gyroscopic Device for Hand Rehabilitation 
      Anil Kumar, Namita (2017-07-25)
      User centered design is an apt process for developing assistive devices, as user needs are given the utmost importance in this approach. On studying current, state of the art hand rehabilitation devices, it was inferred ...
    • Design of bioaerosol sampling inlets 
      Nene, Rohit Ravindra (Texas A&M University, 2007-09-17)
      An experimental investigation involving the design, fabrication, and testing of an ambient sampling inlet and two additional Stokes-scaled inlets is presented here. Testing of each inlet was conducted at wind speeds of ...
    • Design of high efficiency blowers for future aerosol applications 
      Chadha, Raman (Texas A&M University, 2007-04-25)
      High efficiency air blowers to meet future portable aerosol sampling applications were designed, fabricated, and evaluated. A Centrifugal blower was designed to achieve a flow rate of 100 L/min (1.67 x 10^-3 m^3/s) and a ...
    • Design of Outrunner Electric Machines for Green Energy Applications 
      Anvari Rostamkolaei, Bahareh (2017-12-14)
      Interests in using rare-earth free motors such as switched reluctance motors (SRMs) for electric and hybrid electric vehicles (EV/HEVs) continue to gain popularity, owing to their low cost and robustness. Optimal design ...
    • Design of Outrunner Electric Machines for Green Energy Applications 
      Anvari Rostamkolaei, Bahareh (2017-12-14)
      Interests in using rare-earth free motors such as switched reluctance motors (SRMs) for electric and hybrid electric vehicles (EV/HEVs) continue to gain popularity, owing to their low cost and robustness. Optimal design ...
    • Design Optimization of Shape Reconfigurations of Kerf Cells Under Thermal Stimulation 
      Poluri, Kamal (2022-07-06)
      A relief cutting or kerfing is a practical method to create flexible freeform surfaces from relatively stiff materials and thick panels, such as woods and metals. Kerf panels are constructed by an arrangement of kerf unit ...
    • Design, Simulation and Thermo-Economic Assessment of a Transcritical Carbon Dioxide Solar Power Plant for Medium-Scale Electricity and Heat Generation 
      Alvarez Sanchez, Adrian (2020-04-08)
      This project comprises the engineering design and assessment of the novel above critical-point Carbon Dioxide cycle technology integrated with a solar Parabolic Trough Collector (PTC) plant. To accomplish this, preliminary ...
    • Designing and Testing a Quench Heater for a 16 T CIC Dipole 
      Erickson, Michael E
      The purpose of this project is to create and design a quench heater for the 16 T Cable-in-Conduit (CIC) superconducting magnet. This magnet will be used to create stronger and more cost-effective particle accelerators. The ...
    • Designing decision support systems for a broad range of user experience 
      Martin, Merle P. (Texas A&M University. Libraries, 1984)
      Decision support systems designed for audiences of a specific level of user computer knowledge, such as novice users, ignore differences among users. Models designed for experienced users lose the novice user. Models ...
    • Developing Methods For Designing Shape Memory Alloy Actuated Morphing Aerostructures 
      Oehler, Stephen Daniel (2012-10-19)
      The past twenty years have seen the successful characterization and computational modeling efforts by the smart materials community to better understand the Shape Memory Alloy (SMA). Commercially available numerical analysis ...
    • Development of daylighting prediction algorithms for atrium design 
      Kim, Kang-Soo (Texas A&M University. Libraries, 1987)
      To the extent that daylight can be effectively admitted and distributed in large buildings, daylighting can reduce dependence on artificial light and conserve energy. Effective in all climates, an atrium can serve more ...
    • Drift reliability optimization in VLSI ciruit design 
      Huang, Min (Texas A&M University. Libraries, 1992)
      Due to aggressive scaling of transistor feature size in contemporary Very Large Scale Integrated (VLSI) circuits, some wearout failure mechanisms have become much more serious than before. Design-for-Reliability is thus ...
    • Effects of Character Guide in Immersive Virtual Reality Stories 
      Xu, Qinghong (2018-11-27)
      Bringing cinematic experiences from traditional film screens into Virtual Reality (VR) has become an increasingly popular form of entertainment in recent years. VR provides viewers unprecedented film experience that allows ...
    • Energy Conservation Revamps in Fluid Catalytic Cracking Systems 
      Wilson, J. W.; Sloan, H. D. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1984)
      The FCC process continues as one of the major refinery technologies despite changes in refinery operations. The main fractionator/vapor recovery systems associated with many FCC units have the potential for significant ...
    • Energy Conservation Through Effective Steam Trapping 
      Diamante, L.; Nagengast, C. (Energy Systems Laboratory (http://esl.tamu.edu), 1979)
      Fuel costs are rapidly escalating. The overall efficiency of any energy utilization must be improved immediately. Steam traps - though a hardware item which received little attention can substantially effect the overall ...
    • Energy Recovery from Potato Chip Fryers 
      McKee, H. B.; Kympton, H. W.; Arnold, J. W.; Paisan, J. J. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1980)
      The design, operating characteristics, and energy savings from an energy recovery system employed on a potato chip fryer which became operational in December, 1979, is discussed. The design incorporates a modification to ...
    • Error modeling, self-calibration and design of pipelined analog to digital converters 
      Soenen, Eric Georges (Texas A&M University. Libraries, 1992)
      As the field of signal processing accelerates toward the use of high performance digital techniques, there is a growing need for increasingly fast and accurate analog to digital converters. Three highly visible examples ...
    • Evaluation of a System Layer Design for the Visual Knowledge Builder 
      Gomathinayagam, Arun Bharath (2012-02-14)
      When users are searching for documents, they must sift through a collection of potentially relevant documents assessing, categorizing and prioritizing them based on the current task at hand, a process we refer to as document ...
    • Evaluation of high strength concrete prestressed bridge girder design 
      Cuadros Olave, Gladys (Texas A&M University, 2004-09-30)
      This research study focuses on evaluating the design of HSC prestressed bridge girders. Specifically there were three major objectives. First, to determine the current state of practice for the design of HSC prestressed ...