NOTE: This item is not available outside the Texas A&M University network. Texas A&M affiliated users who are off campus can access the item through NetID and password authentication or by using TAMU VPN. Non-affiliated individuals should request a copy through their local library's interlibrary loan service.
20 MHz IF bandpass switched capacitor [] modulator using a high performance OTA with NCFF compensation scheme
Abstract
Switched capacitor (SC) circuits are widely used in many applications because of their accuracy and ease of integration in CMOS technology. They are not suitable for operation in high frequencies because of the settling time limitation of amplifiers. High frequency switched capacitor circuits pose challenging design specifications on the amplifiers which cannot be met by conventional circuit design techniques. High amplifier gain is required for an accurate output, whereas fast settling time is obtained by a high gainbandwidth (GBW) product. Amplifiers that use cascading of gain stages for obtaining high gain require some robust frequency compensation schemes, and usually have a low GBW, resulting in a slow settling time. This work proposes a new compensation scheme for high gain wideband amplifiers - No Capacitor Feed Forward (NCFF) compensation scheme. NCFF scheme uses pole-zero cancellation to obtain high gain, high GBW and a good phase margin. Left half plane (LHP) zeros produced due to the feedforward path causes a positive phase shift and is used to cancel the negative phase shift of poles. Fully differential and single ended operational transconductance amplifiers (OTA) using the proposed NCFF compensation scheme have been designed and fabricated using CMOS AMI 0.5 []m technology. The fully differential OTA has a gain of 97 dB, GBW of 350 MHz and a phase margin of around 90°. Sigma delta [ ] modulators use oversampling and quantization noise shaping to obtain a high dynamic range. They are well suited for use in radio and cellular systems to directly convert the narrowband IF signal centered at high frequencies to digital domain. Switched capacitor implementation of a [ ] modulator requires a fast settling amplifier to operate at high IF frequencies. The design and implementation issues of a 20 MHz IF, 80 MHz clock, fourth order switched capacitor bandpass [ ] modulator are discussed in detail. The modulator uses a high performance OTA using the proposed NCFF compensation scheme and it has been designed and fabricated using 3.3V CMOS TSMC 0.35 []m technology. The bandpass [ ] modulator has a peak SNR of 70 dB (post-layout simulations).
Description
Due to the character of the original source materials and the nature of batch digitization, quality control issues may be present in this document. Please report any quality issues you encounter to digital@library.tamu.edu, referencing the URI of the item.Includes bibliographical references (leaves 91-93).
Issued also on microfiche from Lange Micrographics.
Collections
Citation
Thandri, Bharath Kumar (2001). 20 MHz IF bandpass switched capacitor [] modulator using a high performance OTA with NCFF compensation scheme. Master's thesis, Texas A&M University. Available electronically from https : / /hdl .handle .net /1969 .1 /ETD -TAMU -2001 -THESIS -T424.
Request Open Access
This item and its contents are restricted. If this is your thesis or dissertation, you can make it open-access. This will allow all visitors to view the contents of the thesis.