Show simple item record

dc.creatorInayatullah, Azfar
dc.date.accessioned2012-06-07T22:49:05Z
dc.date.available2012-06-07T22:49:05Z
dc.date.created1997
dc.date.issued1997
dc.identifier.urihttps://hdl.handle.net/1969.1/ETD-TAMU-1997-THESIS-I53
dc.descriptionDue to the character of the original source materials and the nature of batch digitization, quality control issues may be present in this document. Please report any quality issues you encounter to digital@library.tamu.edu, referencing the URI of the item.en
dc.descriptionIncludes bibliographical references.en
dc.descriptionIssued also on microfiche from Lange Micrographics.en
dc.description.abstractThe problem of data loss on a RF channel has been approached from various perspectives. This research employs Reed Solomon (RS) encodina to combat burst noise and Bilnd Equalization to overcome Inter S Symbol Interference (ISI). This simulation of a RF channel is an improvement over the software based simulation because the processes of modulation, demodulation and channel simulation are done in hardware instead of software. Moreover, the BER curves show that equalization carried out in this research has' little effect on the bit error rate implying that the ISI 0 present in this channel cannot be eliminated using blind equalization with Godard's criterion. However, the RS codes combined with bit interleaving can result in a gain of 0 about 2dB at a bit error probability of 10-'. This hardware based approach has also reduced the time required to. simulate the channel from about 10hours to 20minutes.en
dc.format.mediumelectronicen
dc.format.mimetypeapplication/pdf
dc.language.isoen_US
dc.publisherTexas A&M University
dc.rightsThis thesis was part of a retrospective digitization project authorized by the Texas A&M University Libraries in 2008. Copyright remains vested with the author(s). It is the user's responsibility to secure permission from the copyright holder(s) for re-use of the work beyond the provision of Fair Use.en
dc.subjectelectrical engineering.en
dc.subjectMajor electrical engineering.en
dc.titleCombined performance of coding and equalization for data transmitted over a fading channelen
dc.typeThesisen
thesis.degree.disciplineelectrical engineeringen
thesis.degree.nameM.S.en
thesis.degree.levelMastersen
dc.type.genrethesisen
dc.type.materialtexten
dc.format.digitalOriginreformatted digitalen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

This item and its contents are restricted. If this is your thesis or dissertation, you can make it open-access. This will allow all visitors to view the contents of the thesis.

Request Open Access