NOTE: This item is not available outside the Texas A&M University network. Texas A&M affiliated users who are off campus can access the item through NetID and password authentication or by using TAMU VPN. Non-affiliated individuals should request a copy through their local library's interlibrary loan service.
Flow visualization in a multiple disk pump for use as an artificial ventricle
dc.creator | Madigan, Michael Lawrence | |
dc.date.accessioned | 2012-06-07T22:45:49Z | |
dc.date.available | 2012-06-07T22:45:49Z | |
dc.date.created | 1996 | |
dc.date.issued | 1996 | |
dc.identifier.uri | https://hdl.handle.net/1969.1/ETD-TAMU-1996-THESIS-M34 | |
dc.description | Due to the character of the original source materials and the nature of batch digitization, quality control issues may be present in this document. Please report any quality issues you encounter to digital@library.tamu.edu, referencing the URI of the item. | en |
dc.description | Includes bibliographical references. | en |
dc.description | Issued also on microfiche from Lange Micrographics. | en |
dc.description.abstract | Flow patterns in a multiple disk centrifugal pump for use as an artificial ventricle were analyzed for steady flow. The pump consists of 5 flat, washer-shaped, polycarbonate disks contained within a spiral housing. The disks have a 1.5 inch inner diameter and 3.0 inch outer diameter. Four stainless steel pins affix the disks at a constant spacing of .025 inches and terminate in a sixth solid disk. This solid disk couples the pins to a DC motor shaft which rotates the entire disk assembly. A mock circulatory system based on the NIH/Penn State model was employed with a blood analog of 40% glycerin/60% water. Polystyrene particles (250 microns diameter) were used as neutrally buoyant flow markers. Inlet and outlet' pressures, outlet flow rate, and disk rotation rate were all monitored. A 15mW red HeNe laser provided illumination for the particles. Areas of particular interest include between the disks, the inner cavity, and around the disk periphery. Two "high risk" areas were identified which exhibited potential for thrombus formation. Particle track lengths will be calculated to determine fluid velocities. The overall goal of this study was to develop a better understanding of the flow patterns in the disk pump and identify any regions of flow stagnation. | en |
dc.format.medium | electronic | en |
dc.format.mimetype | application/pdf | |
dc.language.iso | en_US | |
dc.publisher | Texas A&M University | |
dc.rights | This thesis was part of a retrospective digitization project authorized by the Texas A&M University Libraries in 2008. Copyright remains vested with the author(s). It is the user's responsibility to secure permission from the copyright holder(s) for re-use of the work beyond the provision of Fair Use. | en |
dc.subject | bioengineering. | en |
dc.subject | Major bioengineering. | en |
dc.title | Flow visualization in a multiple disk pump for use as an artificial ventricle | en |
dc.type | Thesis | en |
thesis.degree.discipline | bioengineering | en |
thesis.degree.name | M.S. | en |
thesis.degree.level | Masters | en |
dc.type.genre | thesis | en |
dc.type.material | text | en |
dc.format.digitalOrigin | reformatted digital | en |
Files in this item
This item appears in the following Collection(s)
-
Digitized Theses and Dissertations (1922–2004)
Texas A&M University Theses and Dissertations (1922–2004)
Request Open Access
This item and its contents are restricted. If this is your thesis or dissertation, you can make it open-access. This will allow all visitors to view the contents of the thesis.