Visit the Energy Systems Laboratory Homepage.
Error Analysis of Heat Transfer for Finned-Tube Heat-Exchanger Text-Board
Abstract
In order to reduce the measurement error of heat transfer in water and air side for finned-tube heat-exchanger as little as possible, and design a heat-exchanger test-board measurement system economically, based on the principle of test-board system error analyses and design, the equation of measurement error of heat transfer in air side and water side about orifice meter for the finned-tube heat-exchanger was obtained. This paper studies the major factors that may influence the largest admitted measurement error of measurement instruments for heat transfer in water and air side, and analyzes the degree that water temperature and pressure measurement influence heat transfer in water side, and the degree that wet bulb temperature difference measurement influences heat transfer in air side. Finally, this paper indicates that the key problem of reducing heat transfer in water side is water temperature measurement of the in-out pipe of heat-exchanger, and wet bulb temperature difference is a key to decrease the heat transfer in air side for finned-tube heat-exchanger. This paper gives a theoretical instruction for designing the measurement system of a finned-tube heat-exchanger test-board
Citation
Chen, Y.; Zhang, J. (2006). Error Analysis of Heat Transfer for Finned-Tube Heat-Exchanger Text-Board. Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu). Available electronically from https : / /hdl .handle .net /1969 .1 /5323.