Search
Now showing items 1-10 of 99
Energy Analysis and Energy Conservation Options for the Addition to Records Storage Building
(Energy Systems Laboratory (http://esl.tamu.edu), Texas A&M UniversityDepartment of Mechanical Engineering, Texas A&M University, 1986)
The energy use and peak load requirements of the addition to
Records Storage Building in Austin, Texas were analyzed using the
DOE 2.1B building energy simulation program. An analysis was made
for the building as specified ...
An Analysis of Efficiency Improvements in Residential Sized Heat Pumps and Central Air Conditioners
(Energy Systems Laboratory (http://esl.tamu.edu), Texas A&M UniversityDepartment of Mechanical Engineering, Texas A&M University, 1986)
This report summarizes: (1) the performance improvements
possible for central air conditioners and heat pumps using
conventional design improvements, (2) the development of a
methodology for estimating the seasonal ...
Energy Analysis and Energy Conservation Option for the Warehouse Facility at the Human Services Center Complex
(Energy Systems Laboratory (http://esl.tamu.edu), Texas A&M UniversityDepartment of Mechanical Engineering, Texas A&M University, 1986)
The energy use of the warehouse facility at the Human
Services Center Complex in Austin, Texas was analyzed using the
DOE-2.1B building energy simulation program. An analysis was made
for each building as specified in ...
An Energy and Peak Loads Analysis of the Texas Department of Health Building, Final Report, Prepared for the Energy Efficiency Division, Texas Public Utility Commission
(Energy Systems Laboratory (http://esl.tamu.edu), Texas A&M UniversityDepartment of Mechanical Engineering, Texas A&M University, 1986)
Rotordynamic Developments For High Speed Multistage Pumps
(Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1986)
At present, the majority factor limiting the designer’s ability to predict the rotordynamic behavior of multistage centrifugal pumps is the availability of accurate input data for the forces acting on the rotor. Recent ...
The Effect Of Specific Speed On The Efficiency Of Single Stage Centrifugal Pumps
(Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1986)
A chart relating the efficiency of centrifugal pumps to the specific speed and capacity at the maximum efficiency capacity has been in use in the pump industry for almost forty years. While it has been useful to both the ...
Analysis Of Nozzle Loads For Process Pumps
(Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1986)
Under extreme conditions, pumps may be required to withstand severe nozzle loads, which often exceed the API 610 specified values. To meet these requirements, pump mechanical behavior versus nozzle loads must be examined ...
API 610 Baseplate And Nozzle Loading Criteria
(Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1986)
The baseplate and nozzle loading criteria in the December 1985 draft version of API610 7th Edition is substantially different from the criteria found in the 6th Edition. The optional heavy duty baseplate criterion has been ...
Analytical And Experimental Techniques For Solving Pump Structural Resonance Problems.
(Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1986)
Proper use of current analytical and experimental techniques is essential to finding and solving structural resonance problems in pumps. Available techniques vary from the relatively simple to the very complex. Accuracy ...
Design Of Pump Shaft Trains Having Variable-Speed Electric Motors
(Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1986)
With converter-fed variable speed electric motors, pulsating torques inevitably occur in the air gap and can cause torsional oscillation in the whole shaft line. The origin and behavior of these torques and how to calculate ...