Search
Now showing items 1-10 of 15
Rotordynamic Stability Of A 9500 Psi Reinjection Centrifugal Compressor Equipped With A Hole Pattern Seal-Measurement Versus Prediction Taking Into Account The Operational Boundary Conditions.
(Texas A&M University. Turbomachinery Laboratories, 2009)
Extensive stability measurements were performed during the full-load, full-pressure factory testing of a five-stage inline centrifugal compressor. The compressor, tested up to a maximum discharge pressure of 655 bar (9,500 ...
Discussion Group T17 On Advanced Topics in Centrifugal Compressor Design
(Texas A&M University. Turbomachinery Laboratories, 2011)
Stability Considerations - A Simplified Approach
(Texas A&M University. Turbomachinery Laboratories, 2011)
In many cases it is necessary to judge the stability behavior of a specific compressor. This might be the OEM checking the feasibility of a proposed compressor layout or it might be the user judging one of his machines ...
Discussion Group T9: Advanced Topics in Centrifugal Compressor Design
(Texas A&M University. Turbomachinery Laboratories, 2014)
Discussion Group T9 Advanced Topics in Centrifugal Compressor Design
(Texas A&M University. Turbomachinery Laboratories, 2013)
Rotordynamic Stability Tests On High-Pressure Radial Compressors.
(Texas A&M University. Turbomachinery Laboratories, 1999)
This paper describes extensive measurements on high-pressure radial compressors with rated discharge pressures of more than 400
bar (5800 psi). The purpose of the measurements was to deterine m the damping behavior of the ...
Subsea Compression Applications - Panel Session
(Texas A&M University. Turbomachinery Laboratories, 2013)
The use of Subsea gas compression technology for subsea re-injection and/or gas transport boosting represents a new and exciting application for rotating equipment, which will allow new gas/condensate field production ...
Coupled Torsional and Lateral Analysis for the Determination of the Damping of the First Torsional Mode of Synchronous Motor Driven Compressor Trains
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2015)
This paper deals with the damping ratio D of the 1st torsional mode of synchronous motor driven compressor trains. The damping ratio is a crucial parameter for the torsional start-up analysis and for the lifetime calculation ...
Subsea Compression Applications - Panel Session
(Texas A&M University. Turbomachinery Laboratories, 2014)
The use of Subsea gas compression technology for subsea re-injection and/or gas transport boosting represents a new and exciting application for rotating equipment, which will allow new gas/condensate field production ...
Discussion Group T18 Advanced Topics in Centrifugal Compressor Design
(Texas A&M University. Turbomachinery Laboratories, 2012)