Search
Now showing items 1-10 of 26
Rotordynamic Stability Of A 9500 Psi Reinjection Centrifugal Compressor Equipped With A Hole Pattern Seal-Measurement Versus Prediction Taking Into Account The Operational Boundary Conditions.
(Texas A&M University. Turbomachinery Laboratories, 2009)
Extensive stability measurements were performed during the full-load, full-pressure factory testing of a five-stage inline centrifugal compressor. The compressor, tested up to a maximum discharge pressure of 655 bar (9,500 ...
Discussion Group T17 On Advanced Topics in Centrifugal Compressor Design
(Texas A&M University. Turbomachinery Laboratories, 2011)
Stability Considerations - A Simplified Approach
(Texas A&M University. Turbomachinery Laboratories, 2011)
In many cases it is necessary to judge the stability behavior of a specific compressor. This might be the OEM checking the feasibility of a proposed compressor layout or it might be the user judging one of his machines ...
STABILITY CONSIDERATIONS: A SIMPLIFIED APPROACH
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2011)
In many cases it is necessary to judge the stability behavior
of a specific compressor. This might be the OEM checking the
feasibility of a proposed compressor layout or it might be the
user judging one of his machines ...
Centrifugal Compressors: Operation and Maintenance, Advanced Design, Wet and Sour Gas Operation
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018)
Topics Outline:
• Meeting current rotordynamics stability standards
• High flow coefficient/mach number impellers
• Low flow coefficiens/high pressure impellers; Reynolds correction
Complicated high pressure gas properties. ...
METS2 Discussion Group 7
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2013)
Advanced Topics on Compressors
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
Discussion Group T9: Advanced Topics in Centrifugal Compressor Design
(Texas A&M University. Turbomachinery Laboratories, 2014)
Discussion Group T9 Advanced Topics in Centrifugal Compressor Design
(Texas A&M University. Turbomachinery Laboratories, 2013)
Rotordynamic Stability Tests On High-Pressure Radial Compressors.
(Texas A&M University. Turbomachinery Laboratories, 1999)
This paper describes extensive measurements on high-pressure radial compressors with rated discharge pressures of more than 400
bar (5800 psi). The purpose of the measurements was to deterine m the damping behavior of the ...