Search
Now showing items 21-24 of 24
Design And Experience With A 30,000 HP Magnetic Bearing Supported Motor Driven Turbocompressor For A Speed Range Of 600 To 6300 Rpm.
(Texas A&M University. Turbomachinery Laboratories, 2000)
In the Northern Netherlands, after more than 30 years of production, the pressure of the gigantic Groningen onshore gas field is gradually decreasing, requiring up to 500 MW compression over the next 30 years to fulfil ...
Debottlenecking Hydrogen Reciprocating Compressors And Synchronous Motors.
(Texas A&M University. Turbomachinery Laboratories, 2000)
A Midwest refinery realized significant gains in hydrocracker throughput and to its bottom line by debottlenecking its hydrogen makeup compressors. Maintaining and even improving compressor reliability and operating ...
Sidestream Optimization Through The Use Of Computational Fluid Dynamics And Model Testing.
(Texas A&M University. Turbomachinery Laboratories, 2000)
The development of sidestreams for industrial centrifugal compressors presents many difficult challenges for aerodynamic designers. Most often, past practice dictated the configurations used for new applications. However, ...
Gas Damper Seal Test Results, Theoretical Correlation, And Applications In Design Of High-Pressure Compressors.
(Texas A&M University. Turbomachinery Laboratories, 2000)
The rotordynamic and leaking characteristics of two types of gas damper seals, honeycomb seal and pocket damper seal, were experimentally evaluated on a rotating test rig. The effect of supply pressure, preswirl, and seal ...