Search
Now showing items 4261-4270 of 4423
T13: Performance of Industrial Gas Turbines
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2021)
Industrial gas turbines have performance characteristics that distinctly depend on ambient and operating conditions Application of these gas turbines, as well as the control and condition monitoring, require to consider ...
CS15: Centrifugal Pump Upgrade for New Operating Condition
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2021)
Centrifugal Pumps used at Upstream and Downstream facility are critical for Oil & Gas business However, the pump process requirement may change over time due to depleting reservoir in Upstream or new process requirement ...
CS06: Inappropriate Operation During Mechanical Running Test of a High-Pressure Compressor Equipped With an Hole Pattern Seal
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2021)
 During the mechanical running test of a HP centrifugal compressor, the rotorexperienced a sudden increase of the radial vibrations During run-down thecompressor experienced a trip and high vibrations were recorded ...
TB12: Rotating Machinery Reliability & Performance Enhancement Through Digitalization And Internal Capability Building
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2021)
Petronas Carigali Peninsular Malaysia Asset (PMA) is currently operating more than 80 units of gasturbine comprises or Power Generation and Gas Compression system More than half of a gas turbinepopulation in PETRONAS resides ...
CS20: Identification and Mitigation of H2 Recycle Gas Compressor Blade Pass Resonance
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2021)
A hydrogen compressor experienced intermittent vibration spikes during operation Review of the vibration plots revealed that the spikes appear at 11x running speed of the compressor The no of vanes of the impeller is 11 ...
DIAGNOSIS OF SCREW PUMP FLOW INSTABILITY FROM CASING VIBRATION – A HOLISTIC MACHINERY DIAGNOSTIC APPROACH.
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)
This paper discusses the diagnosis, further analysis and resolution of abnormally high vibration and noise detected on Lube Oil (LO) screw pumps A & B supplying a Turbo Expander Compressor (TEC). During the initial ...
Installation of a Stall Ring to Mitigate Boiler Feed Water Pump NPSH3 Requirements at Low Flow
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)
An ubiquitous multistage boiler feed water pump for a SMR Hydrogen Plant in a refinery was specified to meet feed water requirements at plant design hydrogen capacity and at a turndown rate. During testing, it was discovered ...
Effects Of Seal Configuration On Seal Performance In Contaminated Applications
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)
Vibration Field Problem Resolved with Analytical Diagnostic Approach and Innovative Impeller Design
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)
Several pumps of same design exhibited field vibrations above API limits, dominated by Vane Passage Frequency (VPF). Root cause analysis included both experimental and theoretical paths.Experimental investigation , with ...
Turbine Bearing Housing Fire Accident Due To hydrogen inflow into nitrogen line of dry gas seal
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)
Fire incidents occurred in the turbine bearing housing at every start-upsince the original wet type seal in the compressor was replaced with a dry gas seal(DGS). The first investigation focused on leakage of the lube oil ...