Search
Now showing items 101-110 of 1218
Successful Selection And Operation Of Gas Turbine Inlet Filtration Systems
(Texas A&M University. Turbomachinery Laboratories, 2011)
A gas turbine inlet filtration system is important for successful operation. The filtration system minimizes the occurrence of foreign object damage, erosion, fouling, and corrosion. The selection of the inlet filtration ...
Speed Signal Deterioration At High Speeds In Electronic Governor And Trip Systems
(Texas A&M University. Turbomachinery Laboratories, 2011)
Thermoplastic Labyrinth Seals In Centrifugal Compressors -15 Years Of Experiences
(Texas A&M University. Turbomachinery Laboratories, 2011)
Steady State Performance Prediction Of Directly Lubricated Fluid Film Journal Bearings
(Texas A&M University. Turbomachinery Laboratories, 2012)
Predicting the performance of directly lubricated bearings is a challenge facing bearing manufacturers and end users alike. In this study, thermoelastohydrodynamic (TEHD) theories are applied to analyze three directly ...
Journal Bearing Upgrade To Solve Reliability Issues In An Accessory Gearbox
(Texas A&M University. Turbomachinery Laboratories, 2010)
The Road to a Fully Integrated Asset Management Strategy Applied to Rotating Equipment
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2011)
Today most companies around the world are very much
aware of the benefits of improved plant reliability and
the elements necessary to achieve this, such as the
development and implementation of risk-based
equipment ...
DESIGN, MANUFACTURE, AND TEST CAMPAIGN OF THE WORLD’S LARGEST LNG REFRIGERATION COMPRESSOR STRINGS
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2011)
Increasing demand for LNG has driven the
requirement for a significant increase in LNG plant capacity.
Qatargas II (QGII), a joint venture initiated by Qatar Petroleum,
is committed to accomplish this while reducing ...
STABILITY CONSIDERATIONS: A SIMPLIFIED APPROACH
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2011)
In many cases it is necessary to judge the stability behavior
of a specific compressor. This might be the OEM checking the
feasibility of a proposed compressor layout or it might be the
user judging one of his machines ...
HIGH FLOW PROTECTION FOR VARIABLE SPEED PUMPS
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2011)
Low flow operation is a well-known cause of centrifugal pump failures and thus it is a custom to have low flow protection. On the other hand, protecting pumps from excessively high flow is usually not considered during ...
Preventing Unstable Operation of a Synthesis Compressor Using Dynamic System Simulation
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2011)
• An example of unexpected dynamic response
• Results of an analysis using modeling of the complete
compressor installation
1. Lay-out of the compressor system
2. Description of the problem
3. Measurements
4. Analysis ...