Now showing items 7077-7096 of 17199

    • Meher-Homji, Cyrus B.; Matthews, Terryl; Pelagotti, Antonio; Weyermann, Hans P. (Texas A&M University. Turbomachinery Laboratories, 2007)
      The international liquefied natural gas (LNG) trade is expanding rapidly. Projects are being proposed worldwide to meet the industry forecasted growth rate of 12 percent by the end of the decade. LNG train designs in the ...
    • Mutasim, Zaher (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2011)
      The performance and durability of industrial gas turbines are strongly dependent on the operating conditions and the environment in which they function at. Engine performance and durability must be equally considered ...
    • Boyce, Meherwan; Gonzalez, Francisco (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2017)
    • Banchik, I. N.; Bohannan, W. R.; Stork, K.; McGovern, L. J. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1981)
      It is a well known fact that the gas turbine in a combined cycle has a higher inherent Carnot efficiency than the steam cycle which has been more generally accepted by industry. Unlike steam turbines, gas turbines do not ...
    • Al-Baloshi, Hussain; Brun, Klaus; Gupta, Manoj; Kurz, Rainer (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018)
      Suggested Topics: • Preventive/predictive maintenance Condition monitoring • Air filtration onshore and offshore Fogging/evaporative cooling/inlet chilling • Liquid fuel handling and storage • Gas fuel issues • Lean premix ...
    • Loberg, T. J. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1980)
      The gas industry fostered more efficient energy utilization long before the idea of energy conservation became fashionable. It became apparent in the late '60's that misguided Federal Legislation was discouraging necessary ...
    • Keller, G. E., II (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1984)
      Gas-adsorption processes are commonly used in the petroleum, natural-gas, petrochemical and other industries. It is important to be aware of those process situations which favor the use of adsorption, and although no hard ...
    • Winn, C. B.; Burns, P.; Guire, J. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1984)
      A gas-fired vented zone heater has recently been developed by the Altar Corporation for Colorado State University (CSU) under a Gas Research Institute (GRI) contract. The unit war developed for auxiliary heating applications ...
    • Turpin, Jim L.; Lea, James F.; Bearden, John L. (Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1986)
      The head capacity characteristics of three different submersible centrifugal pumps were correlated as a function of the gas-to-liquid ratio and pressure at the pump suction. The experimental data were from two independent ...
    • Schmeal, W. R.; Royall, D.; Wrenn, K. F. Jr. (Energy Systems Laboratory (http://esl.tamu.edu), 1997-04)
      The electric and gas industries are each in the process of restructuring and "converging" toward one mission: providing energy. Use of natural gas in generating electric power and use of electricity in transporting natural ...
    • Hyland, M. J. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1981)
      Producing alcohol from agricultural products is a very controversial topic in the U.S. today. This paper presents information on the overall energy balance and clears up the recent controversy on the actual efficiency to ...
    • McCammon, W. L. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1982)
      With the advent of the crude oil price increases, associated with the Middle East crisis, many countries, particularly Brazil, began producing ethanol for the use as fuel in mixture with gasoline. In the United States, ...
    • Chavda, Bhagyesh; Ashraf, Saquib; Kocur, John; Baer, Heinrich (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018)
      Three shaft Gear Box upgraded to meet Screw compressor model upgrade. Gear Box was installed, as a part of compressor upgrade project, with Bentley Nevada 3500 Shaft vibration protection facility and observed trip on ...
    • de Noronha, Roberto Firmento; de Sousa, Dione Alves; de Norman et d'Audenhove, Fabio (Texas A&M University. Turbomachinery Laboratories, 2010)
      Bull gears slippage in speed multiplier of compressor trains occurred on two FPSOs offshore Brazil. These events produced high impact on the amount of flared gas and also in oil production. After being called, the supplier ...
    • Palazzolo, Alan B.; Locke, Stephen R.; Calistrat, Michael; Clark, Robert W.; Ayoub, Akram; Calistrat, Dan; Tang, Punan (Texas A&M University. Turbomachinery Laboratories, 1992)
      Gear couplings can produce large static forces and moments that can affect the vibrations of turbomachinery, even with nearly perfect alignment. Research, testing and case histories have verified this theory and are reported. ...
    • Lundholm, Staffan; Kristensen, Rasmus; Sehlstedt, Niklas; Myklebust, Leif l. (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2015)
    • Grubaugh, Elston K.; Valco, Thomas D. (Texas Agricultural Extension Service, 1982)
    • Al-Hajri, Mohammed (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2011)
      To share with you Abqaiq Plants’ successful experience in resolving a high vibration problem on a Gas Turbine Load Gearbox
    • Maragioglio, Gaspara; Boccadamo, Gianluca; Depau, Valerio; Rotondo, Paola (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2015)
    • Maragioglio, Gaspare; Pescioni, Alessandro; Libraschi, Mirko (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)