Search
Now showing items 1-10 of 58
Pitting Corrosion on Fr6B Gas Turbine Axial Compressor Blades: Investigation and Preventive Measures
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
§ Overview of QG1 Electric power Generation Facility
§ Problem Description
§ Failure Analysis
§ Root Cause Failure Factors
§ Review of Inlet Filtration System
§ Remedial Actions
§ Conclusion
§ Q & A
Unstable Reading of Accelerometers in Cryogenic Service
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
−
RasGas operates over 100 pieces of cryogenic submersible equipment. Approximately 80 % are on pumping service and the rest on expansion service.
−
These units use two vibration transducers to provide protection and ...
Incinerator Air Blower Repetitive Failures
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
Sharing trouble shooting / experience on blower failures.
•To address similar issues / failures due to over-size / over-capacity equipments
•Reference for blowers selection at project stage.
TUTORIAL: SURGE CONTROL AND DYNAMIC BEHAVIOR FOR CENTRIFUGAL GAS COMPRESSORS
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
This tutorial discusses the design and function of surge
control systems, or more precisely, surge avoidance systems
on the basis of the behavior of centrifugal compressors when
they interact with compression systems.
...
TUTORIAL: GAS TURBINE PERFORMANCE
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
The power and efficiency characteristics of a gas turbine
are the result of a complex interaction of different turbo
machines and a combustion system.
In this tutorial, we will address the basic characteristics of
each ...
Shop Rotordynamic Testing -- Options, Objectives, Benefits and Practices
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
Combustion, Fuels and Emissions for Industrial Gas Turbines
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
It is important that gas turbines used in Oil & Gas applications
can burn a wide variety of fuels with the minimum impact on
the environment or economics.
Many types of gaseous and liquid fuels that can be used in Gas
...
MATERIALS SELECTION AND DEVELOPMENT FOR CENTRIFUGAL COMPRESSORS OPERATING IN EXTREME SOUR & ACID GAS SERVICE
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
The rising demand for oil and gas has led us to exploit oil fields and gas reservoirs with increasing amounts of contaminants. Reserves of natural gas are abundant, but about 40% of the fields contain high concentrations ...
Introduction to Industrial Gas Turbines
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
Lateral Rotordynamics of Petrochemical Equipment - Review, Examples and Problems
(Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)