Show simple item record

dc.contributor.otherTurbomachinery Symposium (7th : 1978)
dc.creatorBrown, Royce N.
dc.date.accessioned2017-10-05T14:55:10Z
dc.date.available2017-10-05T14:55:10Z
dc.date.issued1978
dc.identifier.urihttp://hdl.handle.net/1969.1/163777
dc.descriptionLectureen
dc.descriptionPg. 119-123.en
dc.description.abstractEven an apparently well-designed lube and seal system can and will cause turbomachinery problems to occur if all operating parameters are not considered in the design of the lube and seal system. Lube and seal system design, fabrication and installation have made great progress in basic design in the past decade. The introduction and use of API 614 has made its contribution. However - despite these advances - periodically turbomachinery suffers unscheduled outages - sometimes major damage due to the loss of lubricating oil. The paper will discuss some of the problems experienced in the past several years.en
dc.format.mediumElectronicen
dc.format.mimetypeapplication/pdf
dc.language.isoen
dc.publisherTexas A&M University. Gas Turbine Laboratories
dc.relation.ispartofProceedings of the 7th Turbomachinery Symposiumen
dc.subject.lcshTurbomachinesen
dc.titleTurbomachinery Problems - Lube And Seal System Revisiteden
dc.type.genrePresentationen
dc.type.materialTexten
dc.identifier.doihttps://doi.org/10.21423/R1JW9M


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record