Search
Now showing items 1-10 of 15
Squeeze Film Damper Bearing Experimental Vs Analytical Results For Various Damper Configurations.
(Texas A&M University. Turbomachinery Laboratories, 1996)
Higher speeds, longer shafts, and increased power has made squeeze film damper (SFD) bearing performance increasingly more important to control both synchronous and subsynchronous fibration in rotating machinery. SFD bearing ...
Rotordynamic Stability Measurement During Full-Load, Full-Pressure Testing Of A 6000 Psi Reinjection Centrifugal Compressor.
(Texas A&M University. Turbomachinery Laboratories, 2002)
Full-load, full-pressure rotordynamic stability measurements were conducted on a seven-stage, back-to-back centrifugal compressor. To validate rotordynamic predictions, the rotor was excited while operating at full load ...
Centrifugal Compressor Evolution
(Texas A&M University. Turbomachinery Laboratories, 2010)
This paper addresses the advancements that have been made during the past 50 years in the design, analysis, and manufacturing methods for centrifugal compressors. The paper provides a historical perspective on these ...
Centrifugal Compressors 101
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2015)
Centrifugal Compressors 101
(Texas A&M University. Turbomachinery Laboratories, 2014)
Application of Dynamic pressure-balanced Seals in a Multi-stage Centrifugal Compressor
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2016)
Test results for an ASME Power Test Code 10 (PTC) Type 1 test of a 4,500 psia (310 Bara) discharge pressure gas lift centrifugal compressor outfitted with dynamic pressure-balanced seals at the impeller eyes; shaft interstage ...
Recent Experiences In Full Load Full Pressure Shop Testing Of A High Pressure Gas Injection Centrifugal Compressor.
(Texas A&M University. Turbomachinery Laboratories, 1994)
Evaluation Of A High Speed, Light Load Phenomenon In Tilting-Pad Thrust Bearings.
(Texas A&M University. Turbomachinery Laboratories, 2000)
This paper discusses a newly found high speed, light load hydrodynamic tilting-pad thrust bearing phenomenon was first witnessed on centrifugal compressors operating above 10,000 rpm. Testing results have shown that in ...
Centrifugal Compressors 101 : Part 1
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2016)
Short Course T1 On Centrifugal Compressors 101
(Texas A&M University. Turbomachinery Laboratories, 2011)