Search
Now showing items 341-350 of 875
Discussion Group T9 Verification of Protective Systems
(Texas A&M University. Turbomachinery Laboratories, 2012)
Discussion Group P9 Sealless Pumps
(Texas A&M University. Turbomachinery Laboratories, 2012)
Influence Of Impeller Leading Edge Profiles On Cavitation And Suction Performance
(Turbomachinery Laboratory, Texas A&M University, 2011)
The cavitation behavior and suction performance of a pump are largely influenced by the geometry at the impeller eye. A number of geometric factors at the impeller eye have an influence on cavitation, such as, the inlet ...
High Pressure Sealing Systems For Boiler Circulating Pumps
(Turbomachinery Laboratory, Texas A&M University, 2011)
Boiler circulating pumps are among the most critical and difficult rotating equipment in power plants. The bearings and seals are subject to very high loads with respect to forces and temperatures. Typical operating pressures ...
Hazards Of Reverse Pump Rotation
(Turbomachinery Laboratory, Texas A&M University, 2011)
Discussion Group T10: Hot-Gas Expanders
(Texas A&M University. Turbomachinery Laboratories, 2014)
So What Did We Learn About Pumps During The Past 20 Years?
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2014)
The paper discusses and highlights the most prominent critical pump related challenges and experiences Eskom has been faced with during the past 20 years. The challenges include the following: The effects of Pump System ...
Coupling Failure Due to a Motor Fault
(Texas A&M University. Turbomachinery Laboratories, 2014)
High Speed Arrangement 1 Seals In Water Injection Service
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2013)
As the pressure in older oil wells decrease over time, water injection services are becoming more prevalent on offshore platforms. Water injection is used to maintain the pressure in the wells and displace the oil from the ...
Hydraulic Upgrade Of Hot Water Circulation Pumps In A District Heating System
(Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2013)