Search
Now showing items 141-150 of 502
Advisory Committee / Turbomachinery Symposium (38th : 2009)
(Texas A&M University. Turbomachinery Laboratories, 2009)
Short Courses / Turbomachinery Symposium (38th : 2009)
(Texas A&M University. Turbomachinery Laboratories, 2009)
Full-Load Testing Of An All-Electric Centrifugal Compressor For Miscible Gas Injection.
(Texas A&M University. Turbomachinery Laboratories, 2001)
A two casing high-pressure injection compressor train driven by a directly coupled high-speed induction motor was tested to demonstrate satisfactory electrical, aerothermal, and rotordynamic performance. Some key test ...
Two Unusual And Catastrophic Bearing Failures Caused By Electrical Arcing In The Oil Film, Their Causes, And The Surprisingly Simple Solutions That Cured Them.
(Texas A&M University. Turbomachinery Laboratories, 2001)
Rotating equipment engineers are frequently not prepared to deal with the catastrophic damage that often accompanies electrical arcing in the oil film of high-speed turbomachinery. Electrical engineers at the site are often ...
Current And Vibration Monitoring For Fault Diagnosis And Root Cause Analysis Of Induction Motor Drives.
(Texas A&M University. Turbomachinery Laboratories, 2002)
Induction motor drives are the most widely used electrical drive systems and they typically consume 40 percent of an industrialized nation’s total generating capacity. In the USA the total generating capacity is approximately ...
Assessment Of Technology And Economic Benefits Of Reciprocating Machine Condition Monitoring And Diagnostic Systems.
(Texas A&M University. Turbomachinery Laboratories, 2002)
The ongoing trend toward automation of the oil, gas, and chemical industry has significantly changed the entire industry. Digital control systems utilizing advanced computer technologies are installed to manage integrated ...
Rotordynamic Stability Measurement During Full-Load, Full-Pressure Testing Of A 6000 Psi Reinjection Centrifugal Compressor.
(Texas A&M University. Turbomachinery Laboratories, 2002)
Full-load, full-pressure rotordynamic stability measurements were conducted on a seven-stage, back-to-back centrifugal compressor. To validate rotordynamic predictions, the rotor was excited while operating at full load ...
Professional Staff for the Proceedings of the 31th Turbomachinery Symposium
(Texas A&M University. Turbomachinery Laboratories, 2002)
Turbomachinery Labratory (2002)
(Texas A&M University. Turbomachinery Laboratories, 2002)
Table of Contents for the Proceedings of the 31th Turbomachinery Symposium
(Texas A&M University. Turbomachinery Laboratories, 2002)