Browsing Turbomachinery and Pump Symposia by Author "Nakaniwa, Akihiro"

Now showing items 1-4 of 4

    • Development of High-Pressure Ratio and Wide-Operation Range 700bar Compressor 
      Tokuyama, Shinichiro; Ujihara, Diogo Yoshikazu; Nakaniwa, Akihiro; Saburi, Satoshi (Texas A&M University. Turbomachinery Laboratories, 2014)
      Pre-Salt development projects continue to expand offshore Brazil into ever deeper waters year after year. Consequently, the required Discharge Pressures for Re-Injection Compressors aboard FPSO’s are likely to exceed current ...
    • High Frequency Acoustic Excitation in Centrifugal Compressor and Adjacent Piping Vibration 
      Hirata, Daisuke; Nekomoto, Yoshitsugu; Ibrahim, Fady; Nakaniwa, Akihiro; van Beek, Pieter; Frediani, Luca (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station; Texas A & M University. Libraries; Texas A & M University. Libraries, 2021)
      In a centrifugal compressor, interactions between impeller blades and stationary parts such as diffuser vanes will generate high frequency pressure pulsations. The frequencies of these pulsations, so called “blade passing ...
    • Impeller Stall Induced By Reverse Propagation Of Non-Uniform Flow Generated At Return Channel 
      Iwamoto, Shinji; Yoneda, Keizo; Tokuyama, Shinichiro; Higuchi, Hirofumi; Nakaniwa, Akihiro; Barrington, Bryan (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2016)
      In the case of centrifugal compressors, minor non-uniform flow upstream of the impeller is induced by an asymmetrical configuration in the circumferential direction at the compressor suction casing. This non-uniform flow ...
    • Investigation Results for Surge Phenomena of Centrifugal Compressor Related with Piping Arrangements and Test Conditions 
      Kiuchi, Daisuke; Nakaniwa, Akihiro; Tokuyama, Shinichiro; Matsuyama, Keisuke (Texas A&M University. Turbomachinery Laboratories, 2013)
      The shop performance test of a hydrogen recycle gas compressor for refinery plant was conducted with the suction pressure of 50barA based on ASME PTC-10 Type-2 test. During testing, a surge phenomenon was observed at a ...