Browsing Turbomachinery and Pump Symposia by Author "Heald, Charles C."

Now showing items 1-4 of 4

    • API 610 Ninth Edition Highlights 
      Sanders, Jack D.; Jones, Roger L.; Heald, Charles C. (Texas A&M University. Turbomachinery Laboratories, 2002)
      API Standard 610, “Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry Services,” has been revised from the Eighth Edition to the Ninth Edition and developed into an International Standard, ISO 13709. The ...
    • Design And Operation Of Pumps For Hot Standby Service 
      Heald, Charles C.; Penry, David G. (Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1988)
      Pump thermal distortion problems routinely arise in refinery applications where hot fluids must be handled. This is particularly the case when warming up standby pumps. The single stage, double suction configuration, which ...
    • Development And Qualification Of A Magnetically Coupled Process Pump For API 610 7th Edition Services 
      Heald, Charles C.; Behnke, Paul W.; Gussert, Richard F. (Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1992)
      A magnetically coupled process pump configuration has been developed to provide strict compliance with API Standard 610, 7th Edition, and Section VIII of the ASME Code by rigorous reading and interpretation of these standards ...
    • Experimental Study Of The Influence Of Backflow Control On Pump Hydraulic-Mechanical Interaction 
      Kesztejna, Paul J.; Heald, Charles C.; Cooper, Paul (Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, 1985)
      A series of right-angle pump intakes, incorporating minimum axial depths and decelerating flows, has been experimentally evaluated using an air flow test procedure. Performance was measured, internal flow fields observed ...