Search
Now showing items 1-10 of 329
Energy Efficiency / Renewable Energy (EE/RE) Projects in Texas Public Schools
(Energy Systems Lab, 2011-11)
Development Of A High Pressure Rotordynamic Test Rig For Centrifugal Compressors Internal Seals Characterization
(Texas A&M University. Turbomachinery Laboratories, 2011)
The current centrifugal compressor design for the Oil & Gas market is more and more challenging since the cost requirements and the presence of many competitors is pushing towards casing size reduction and rotational speed ...
Turbo-Expander Compressor Active Magnetic Bearing Trips Reduction - A Case Study
(Texas A&M University. Turbomachinery Laboratories, 2011)
Correction Of Chronic Thrust Bearing Failures On A Refrigeration Compressor
(Texas A&M University. Turbomachinery Laboratories, 2011)
Tilting-Pad Bearings: Measured Frequency Characteristics Of Their Rotordynamic Coefficients
(Texas A&M University. Turbomachinery Laboratories, 2011)
This paper reviews a long standing issue related to the stiffness and damping coefficients of tilting-pad (TP) bearings; namely, What is the nature of their frequency dependency? A research project was implemented at the ...
“Beating” Effect Caused By Two Closely Spaced Mechanical Frequencies Observed On Two Shaft, Gas Turbine Drive
(Texas A&M University. Turbomachinery Laboratories, 2011)
Reverse Rotation In Centrifugal Compressors
(Texas A&M University. Turbomachinery Laboratories, 2011)
Reliability Improvement For Reciprocating Compressor Valve In CCR Reformer (Case Study)
(Texas A&M University. Turbomachinery Laboratories, 2011)
Background: After revamp of reformer CCR process where all three compressors are running without stand-by, compressor valve life decreased drastically from 1 year to a few(2~3) months. Troubleshooting: Whole entire factors ...
Higher Reliability Of Oil Operated Bolt Tensioner For Larger-Sized Steam Turbine Casings With Higher Inlet Steam Pressure
(Texas A&M University. Turbomachinery Laboratories, 2011)
Balance Instability And Vibration On A 6 Mw Induction Motor Rotor
(Texas A&M University. Turbomachinery Laboratories, 2011)