Browsing Digitized Theses and Dissertations (1922–2004) by Author "James, Ray W."
Now showing items 1-6 of 6
-
Bolton, Robert William (Texas A&M University. Libraries, 1993)The objective of this research was measuring bit temperatures with an infrared pyrometer while drilling printed circuit board stacks. Cited research indicated drilling temperatures are related to many plated-through-hole ...
-
Peart, Walter Lee (Texas A&M University. Libraries, 1990)The process of designing a typical simply supported girder for service loads is well established. However, the fact that the girder will be suspended by cables during the erection phase affects the safety of the girder. ...
-
Sobanjo, John Olusegun (Texas A&M University. Libraries, 1991)The current rate of deterioration of highway bridges in the United States has created the need for a comprehensive bridge management system (BMS). This need has also been recognized in Texas, necessitating the development ...
-
An interaction theory for multi-layered bonded composite beam systems with shear deformation effects Osegueda, Roberto Alejandro (Texas A&M University. Libraries, 1987)An approximate partial interaction theory is presented for the analysis of multi-layered composite beams connected by means of adhesion. The formulation includes the effects of elastic slip, differential deflection, ...
-
Ko, Man-Gi (Texas A&M University. Libraries, 1992)Measurements system of three-dimensional motion of an impacting vehicle were studied. Through the review of existing systems, a nine accelerometer array was found to be a both stable and economical system. This system ...
-
Perera, Huron Samantha (Texas A&M University. Libraries, 1987)In the research described here, a vehicle/barrier crush model was developed and combined with a vehicle model to simulate impacts with the concrete safety-shaped barriers (CSSB). The crush model accounts for the effects ...