Search
Now showing items 1-10 of 11
A consistent first-order nonlinear shell theory
(1969)
A general nonlinear theory of shells is derived. The theory is valid for large extensions, shear and rotations. The large rotations of the shell are described in detail. The measures of bending deformation then are written ...
On stresses and deformations in anisotropic toriodal shells subjected to uniform internal pressure
(1968)
An analysis of a thin toroidal shell of circular cross section, constructed form a plane anisotropic material and subjected to uniform internal pressure, is conducted with the use of linear bending theory. The analysis ...
A study of combined heat and mass transfer by free convection from a controlled environment to a plate at -310°F
(1967)
An experimental study of heat and mass transfer in free convection from a controlled environment to a plate at liquid nitrogen temperature (-310°F) has been made. The temperature of the environment was varied from 36°F to ...
A study of combined heat and mass transfer by free convection from a controlled environment to a plate at -310°F
(Texas A&M UniversityTexas A&M University, 1967)
An experimental study of heat and mass transfer in free convection from a controlled environment to a plate at liquid nitrogen temperature (-310°F) has been made. The temperature of the environment was varied from 36 °F ...
An investigation of the impact behavior of a rigid body
(1967)
Modern freeways require adequate lighting facilities, and in order to meet lighting requirements, light posts sometimes have to be located near the edge of the traffic lane. Single post sign standards and stop light posts ...
An investigation of the nature of microstructural damage in a filled elastomeric compostie material
(1968)
Elastomeric composite materials have been of interest for some time. With the advent of solid rocket propellants, however, a critical need has developed for the evaluation of those mechanical properties needed for structural ...
An experimental investigation of boiling burnout for subcooled carbon tetrachloride under conditions of constrained vapor space volume
(1968)
It has been determined that boiling heat flux densities may be made to exceed maximum pool boiling values for the same pressure and subcooling. Heat flux density elevations of about 50% were measured, and larger values may ...
Transverse effects in thin elastic shells
(1969)
A shell theory is introduced which uses linearly exact expressions for the transverse variation of the displacement components. These displacement variations, first formulated by Kozik, include separately the effects of ...
Echelon control for automatic control systems
(1967)
Echelon control has as its goal the control of a single variable through the interaction of a collection of controllers. The objective is that the controllers will work together in a manner such that each has a designated ...
Investigation of gas species generation by electrically exploding wires at low pressure
(1969)
A series of metallic wires of 10.5 inches in length were electrically exploded in a steel chamber 13.625 inches in diameter and 4 feet in length. The gases in the chamber before and after the explosion were determined using ...