Browsing by Subject "Interdisciplinary Engineering"
Now showing items 1-12 of 12
-
(Texas A&M University. Libraries, 1981)The purpose of this study was to determine the operational viability of the Army's Energy Conservation Program with respect to health care facilities. In particular, the status of the program was ascertained by measuring ...
-
(Texas A&M University. Libraries, 1970)This research presents the design of a specialized information center which will respond to and complement a broad, social or multidisciplinary program. The model has been developed within the framework of the marine ...
-
(Texas A&M University, 2013-03-13)This report deals with the eighteen months of professional engineering experience and the six months of non-engineering experience gained by the author during a twenty-four month internship with Cameron Iron ...
-
(Texas A&M University, 2013-03-13)The first internship was conducted at the firm of Drilco, Inc. The primary engineering objective of the internship was to conduct a metrication impact study for the firm; this study was the basis for a report ...
-
(Texas A&M University. Libraries, 1970)This dissertation considers the influences of thermal cycling on process induced dislocations in single crystal silicon wafers. To determine these influences, a technique for selectively inducing dislocations into silicon ...
-
Identification and measurement of select factors which bias causation analyses of accident phenomena (Texas A&M University. Libraries, 1975)The allocation of accident countermeasures to prevent injury, damage, and other losses within a man/machine/environment system is partially based upon the findings of accident cause analyses. The effectiveness of countermeasures ...
-
(Texas A&M University, 2013-03-13)
-
(Texas A&M University, 2013-03-13)
-
(Texas A&M University. Libraries, 1977)Using the latest scientific and technological breakthroughs in the fields of information transfer and graphic arts for the benefit of the developing nations is the inherent characteristic of this national facsimile ...
-
(Texas A&M University. Libraries, 1976)Opening, shearing and combined mode fracture tests were conducted with long rectangular strips of plexiglas clamped on the long edges and containing centered and off-centered cracks. The critical stress intensity factors, ...
-
(Texas A&M University. Libraries, 1972)Accurate measurement of highway skid resistance in terms of skid numbers determined in accordance with ASTM method D 274-70 has required the application of appropriate reference standards for the calibration of locked wheel ...
-
(Texas A&M University. Libraries, 1975)This research considers two critical problems faced by large institutions in strategic level planning and decision-making situations involving the process of technological change. The first is that most decisions are not ...