Now showing items 1-16 of 16

    • Asynchronous Motor - Failure of Rotor Lamination Teeth 

      Coudray, Xavier; Delhaye, Guillaume; Velly, Nicolas; Quoix, Bernard; Gelin, Alain; Lucas, Antoine (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2016)
      During full load testing of moto-compressor, abnormal vibration were detected. Failure was observed on electrical motor rotor lamination teeth. Deep experimental analysis and metallurgical investigations revealed a high ...
    • Discussion Group T09: Dry Gas Seals for Compressors 

      Weyermann, Hans; Quoix, Bernard; Wilson, Rich; Baldassarre, Leonardo; Delrahim, Joe; Marta, John; Goebel, Daniel (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2016)
    • Discussion Group T11 Dry Gas Seals for Compressors and Pumps 

      Weyermann, Hans; Quoix, Bernard; Wilson, Rich; Baldassarre, Leonardo; Delrahim, Joe; Marta, John; Goebel, Daniel (Texas A&M University. Turbomachinery Laboratories, 2013)
    • Discussion Group T11: Dry Gas Seals for Compressors 

      Weyermann, Hans; Quoix, Bernard; Wilson, Rich; Baldassarre, Leonardo; Delrahim, Joe; Marta, John; Goebel, Daniel (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2015)
    • Discussion Group T11: Dry Gas Seals for Compressors 

      Weyermann, Hans; Quoix, Bernard; Wilson, Rich; Baldassarre, Leonardo; Delrahim, Joe; Marta, John; Goebel, Daniel (Texas A&M University. Turbomachinery Laboratories, 2014)
    • Discussion Group T3 Dry Gas Seals for Compressors and Pumps 

      Weyermann, Hans; Quoix, Bernard; Baldassarre, Leonardo; Delrahim, Joe; Marta, John; Goebel, Daniel (Texas A&M University. Turbomachinery Laboratories, 2012)
    • Discussion Group T6 On Dry Gas Seals 

      Weyermann, Hans; Quoix, Bernard; Baldassarre, Leonardo; Delrahim, Joe; Marta, John; Goebel, Daniel (Texas A&M University. Turbomachinery Laboratories, 2011)
    • Dry Gas Seals for Compressors 

      Weyermann, Hans; Quoix, Bernard; Wilson, Rich; Baldassarre, Leonardo; Delrahim, Joe; Marta, John; Goebel, Daniel (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2017)
    • Dry Gas Seals for Compressors 

      Weyermann, Hans; Quoix, Bernard; Baldassarre, Leonardo; Delrahim, Joe|Johnson, Emery; Auzenne, Chris (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018)
      How to specify an integrally geared compressor Typical process applications Controlling an integral gear compressor - IGV, VFD Rotordynamic considerations
    • High Performance Bearing Comparison 

      Ronan, Josh; Shoup, Thomas; Perney, Gwenael; Robertson, Chad; Quoix, Bernard; Gelin, Alain (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2015)
      With the increasing demand for high performance gearboxes, larger, faster, more highly loaded bearings are requiring more oil and creating more heat than ever before. This means the lubrication systems must be larger to ...
    • Hybrid Pump: A New Type Of Pump For The Pazflor Deep Sea Project 

      Bibet, Pierre-Jean; Quoix, Bernard; Grimstad, Haakon (Texas A&M University. Turbomachinery Laboratories, 2009)
      Subsea processing gives pump engineers permanent technical challenges due to the comprehensive specifications that often stretch the proven limits of technology. It is particularly true for pumps that have to boost a ...
    • Lifetime of Gas Turbines Hot Section Parts in an O&G Environment 

      Quoix, Bernard; Bellocq, Pablo; Pesquet, Amelie (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018)
      The main driver to define the time between overhauls of a gas turbine is the life of the hot components. For an Oil&Gas operator, a turbine overhaul represents a major cost and therefore is a key point for performance ...
    • Mechanical And Performance Testing Method Of An Integrated High-Speed Motor Compressor. 

      Alban, Thomas; Pellerin, Olivier; Laboube, Pierre; Quoix, Bernard; Gelin, Alain; Oliva, Matthieu (Texas A&M University. Turbomachinery Laboratories, 2009)
      The integrated electric motocompressor is a recently available technology that has the advantage of drastically simplifying the machine configuration. The use of a high speed electrical motor in the process gas combined ...
    • Sub-Synchronous Vibrations On a Vertical Electrical Motor During Factory Testing Observed Phenomenon, Interpretation and Resolution 

      Quoix, Bernard; Cloud, C. Hunter; Gelin, Alain; He, Minhui (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2017)
    • Subsynchronous Vibrations on a Vertical Electrical Motor During Factory Testing – Observed Phenomenon, Interpretation and Resolution 

      Gelin, Alain; Cloud, C. Hunter; Quoix, Bernard; He, Minhui (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018)
      During the factory tests of a vertical electric driven de-ballasting pump, casing vibrations were observed on the motor above the contractual limit of 2.8 mm/s, mainly on the motor’s top, Non-Drive End. Supported by fluid ...
    • Subsynchronous Vibrations On Turboexpanders Equipped With Magnetic Bearings Assessment, Understanding And Solutions 

      Shokraneh, Houman; Richaume, Laurent; Quoix, Bernard; Oliva, Matthieu (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2016)
      In most natural gas applications, turboexpanders are operating close to or on the dew point line and a mixture entering the turboexpander impeller is a combination of liquid and gas phases of the natural gas. The presence ...