Browsing by Author "Schubert, Jerome"
Now showing items 101-120 of 122
-
Jiang, Shan (2014-12-10)Rotary steerable drilling tool systems (RSS) are ideal for tool integrating downhole automation control and drilling technology, which are used for drilling directional and complex track wells. A simply supported beam model ...
-
Haghshenas, Ashkan (2015-05-22)Hydraulic fracturing fluids are usually prepared in the field using fresh water. High costs of water acquisition and waste water disposal, and the lack of available water resources near operation sites, make the reuse of ...
-
Sanchez Telesforo, Hugo Antonio (2017-06-30)The scope of this research is to study the rheological behavior of an oil based mud (OBM) sample from the Mexican side of the Gulf of Mexico (GOM) under extreme conditions of High Pressure High Temperature (HPHT). In the ...
-
Haghshenas, Arash (2013-04-24)The worst scenario of drilling operation is blowout which is uncontrolled flow of formation fluid into the wellbore. Blowouts result in environmental damage with potential risk of injuries and fatalities. Although not all ...
-
Rasulo, Marcus P (2016-05-03)Drag embedment anchors (DEA) are widely used for the temporary, and to a lesser extent the permanent mooring of offshore structures. While they can provide an effective mooring solution, the most commonly used design method, ...
-
Komolafe, Olusola Ayandire (2019-11-25)Offshore conductors are an integral part of the oil and gas well and they support the motions from the riser, which are usually subjected to environmental loads. These structures are designed to meet requirements for ...
-
Mansouri, Hamza (2017-07-27)The models used currently in industry have shown a considerable discrepancy between theoretical data and actual data observed in the field. The birth of torque and drag (T&D) modeling was in 1984 in Exxon Production Research ...
-
Structural Reliability: Assessing the Condition and Reliability of Casing in Compacting Reservoirs Chantose, Prasongsit (2012-02-14)Casing has a higher risk of failure in a compacting reservoir than in a typical reservoir. Casing fails when reservoir compaction induces compression and shear stresses onto it. They compact as reservoir pressure depletes ...
-
Kim, Jungyong (2017-07-21)Over the last decade, there have been major changes in casing design requirements in the oil and gas industry. The changes were necessary to withstand the loads and stresses from the unconventional reservoir. However, there ...
-
Al muhaideb, Abdullah Reyad (2020-07-15)Study 1 : Drilling complexity has been increasing over the years. With deeper targets, the oil and gas industry is reaching record high downhole temperatures. For these high temperature regions, a special and a careful ...
-
King, Lauren (2010-01-16)When drilling offshore, shallow gas hazards are a major concern because of their potential to cause a major blowout. This is a special concern when drilling in shallower water, where the gas influx reaches the rig sooner. ...
-
Cortes, Jairo A (2018-08-17)Oil-based drilling fluids (OBDF) can enhance wellbore stability in water-sensitive reservoirs and protect metal surfaces of drilling equipment to minimize corrosion due to H2S and CO2. Components of OBDF include oil as the ...
-
Al-yami, Abdullah Saleh Hussain; Schubert, Jerome (United States. Patent and Trademark Office; Texas A&M University. Libraries, 2015-12-01)Systems and methods are provided for a well control expert system that provides well control recommendations for a drilling system. The well control expert system includes a well control Bayesian decision network (BDN) ...
-
Al-yami, Abdullah Saleh Hussain; Schubert, Jerome (United States. Patent and Trademark Office; Texas A&M University. Libraries, 2015-12-01)Provided are systems and methods for drilling fluids expert systems using Bayesian decision networks to determine drilling fluid recommendations. A drilling fluids expert system includes a drilling fluids Bayesian decision ...
-
Al-yami, Abdullah Saleh Hussain; Schubert, Jerome (United States. Patent and Trademark Office; Texas A&M University. Libraries, 2015-09-22)Systems and methods are provided for expert systems for well completion using Bayesian decision networks to determine well completion recommendations. The well completion expert system includes a well completion Bayesian ...
-
Feng, Ming (2012-07-16)The extreme operating conditions in deepwater drilling lead to serious relative problems. The knowledge of subsea temperatures is of prime interest to petroleum engineers and geo-technologists alike. Petroleum engineers ...
-
Cavalcanti De Sousa, Pedro (2020-04-13)Drillers dedicate many hours to well control training, where they learn how to identify a kick by looking at drilling parameters and comparing them to the planned values. In HPHT wells, UBD and other advanced drilling ...
-
Sokhanvarian, Khatere (2012-10-24)Acid treatment, especially at high temperatures, is very challenging since HCl is really corrosive to the metal equipment. The use of HCl is associated with face dissolution, corrosion, and iron precipitation. Organic acids ...
-
Chun, Kwang Hee (2013-08-01)The effect of coupled thermo-poroelastic behavior on hydraulic fracture propagation is of much interest in geothermal- and petroleum-related geomechanics problems such as wellbore stability and hydraulic fracturing as pore ...
-
Huseynzade, Samir (2009-05-15)In-situ upgrading of oil using hydrogen donors is a new process. In particular, very little research has been conducted with respect to in-situ oil upgrading using hydrogen donor under in-situ combustion. Several papers ...