Characteristics and removal of filter cake formed by formate-based drilling mud
MetadataShow full item record
Formate-based mud has been used to drill deep gas wells in Saudi Arabia since 2004. This mud typically contains XC-polymer, starch, polyanionic cellulose, and a relatively small amount of calcium carbonate particles, and is used to drill a deep sandstone reservoir (310°F). Calcium carbonate particles are frequently used as weighting material to maintain the pressure that is required for well control and minimize the leak-off. Such solids become consolidated and trapped in the polymeric material and this makes the filter cake a strong permeability barrier. Various cleaning fluids were proposed to remove drilling mud filter cake; including: solid-free formate brine and formate brine doped with organic acids (acetic, formic, and citric acids), esters, and enzymes. The main objective of this research is to assess the effectiveness of these cleaning fluids in removing drilling mud filter cake. A dynamic high-pressure/high-temperature (HPHT) cell was used to determine characteristics of the drilling mud filter cake. Drilling mud and completion fluids were obtained from the field. Compatibility tests between potassium formate brine, cleaning fluids, and formation brine were performed at 300ºF and 200 psi using HPHT visual cells. Surface tensions of various cleaning fluids were also measured at high temperatures. The conventional method for cleaning the filter cake is by circulating solid-free formate brines at a high flow rate. This mechanical technique removes only the external drilling fluid damage. Citric acid at 10 wt%, formic acid, and lactic acid were found to be incompatible with formate brine at room temperature. However, these acids were compatible with formate brine at temperatures greater than 122°F. Only acetic acid was compatible with formate brine. A formula was developed that is compatible at room and reservoir temperature. This formula was effective in removing filter cake. A corrosion inhibitor was added to protect downhole tubulars. In general detail, this research will discuss the development of this formula and all tests that led to its development.
Alotaibi, Mohammed Badri (2008). Characteristics and removal of filter cake formed by formate-based drilling mud. Master's thesis, Texas A&M University. Available electronically from