Automated Protocol for the Analysis of Dynamic Mechanical Analyzer Date from Fine Aggregate Asphalt Mixes

Abstract

Fatigue cracking and moisture damage are two important modes of distresses in asphalt pavements. Recently, the Dynamic Mechanical Analyzer (DMA) was used to characterize fatigue cracking and evaluate the effects of moisture damage on the Fine Aggregate Matrix (FAM) portion of asphalt mixtures. The FAM specimens should be properly fabricated to represent the composition and structure of the fine portion of the mixture.

The objective of the first phase of this study was to develop a standard test procedure for preparing FAM specimens such that it is representative of the mixture. The method consists of preparing loose full asphalt mixtures and sieving through different sizes. Then, the ignition oven was used to determine the binder content associated with the small size materials (passing on sieve #16). Sieve #16 is used to separate fine aggregates from the coarse aggregates. The applicability of this new method will be evaluated using a number of asphalt mixtures.

The objective of the second phase of this study was to develop software to analyze the data from DMA test. Such software will enable engineers and researchers to perform the complex analysis in very short time. This is Microsoft Windows ® based software, executable in any hardware configuration under this operational system.