Extraction of the second-order nonlinear response from model test data in random seas and comparison of the Gaussian and non-Gaussian models
MetadataShow full item record
This study presents the results of an extraction of the 2nd-order nonlinear responses from model test data. Emphasis is given on the effects of assumptions made for the Gaussian and non-Gaussian input on the estimation of the 2nd-order response, employing the quadratic Volterra model. The effects of sea severity and data length on the estimation of response are also investigated at the same time. The data sets used in this study are surge forces on a fixed barge, a surge motion of a compliant mini TLP (Tension Leg Platform), and surge forces on a fixed and truncated column. Sea states are used from rough sea (Hs=3m) to high sea (Hs=9m) for a barge case, very rough sea (Hs=3.9m) for a mini TLP, and phenomenal sea (Hs=15m) for a truncated column. After the estimation of the response functions, the outputs are reconstructed and the 2nd order nonlinear responses are extracted with all the QTF distributed in the entire bifrequency domain. The reconstituted time series are compared with the experiment in both the time and frequency domains. For the effects of data length on the estimation of the response functions, 3, 15, and 40- hour data were investigated for a barge, but 3-hour data was used for a mini TLP and a fixed and truncated column due to lack of long data. The effects of sea severity on the estimation of the response functions are found in both methods. The non-Gaussian method for estimation is more affected by data length than the Gaussian method.
SubjectQuadratic Volterra Model
Gaussian and non-Gaussian input
Kim, Nungsoo (2004). Extraction of the second-order nonlinear response from model test data in random seas and comparison of the Gaussian and non-Gaussian models. Doctoral dissertation, Texas A&M University. Texas A&M University. Available electronically from