Now showing items 1-4 of 4
The experimental implementation and comparison of active, semiactive, and passive vehicle suspensions utilizing a linear electric motor
(Texas A&M University, 1994)
The primary objective of this research is the investigation of the experimental implementation of an active automobile suspension, three types of semiactive suspensions, and a passive suspension. These suspensions are ...
A study of the effect of variable speed machining on regenerative chatter in end milling
(Texas A&M University, 2000)
The objective of the research is to study the practical application of Variable Speed Machining (VSM) as a strategy to control regenerative chatter in end milling. In this research, experiments are conducted on a Bridgeport ...
Development of a two-color laser-induced fluorescence based temperature imaging device with micro-scale resolution
(Texas A&M University, 2002)
Two-color laser induced fluorescence (LIF) diagnostics techniques were used to map the temperature distribution of fluid moving through a micro-channel. The fluid (de-ionized water) was pumped through a closed-loop system ...
A study of combined heat and mass transfer by free convection from a controlled environment to a plate at -310°F
(Texas A&M UniversityTexas A&M University, 1967)
An experimental study of heat and mass transfer in free convection from a controlled environment to a plate at liquid nitrogen temperature (-310°F) has been made. The temperature of the environment was varied from 36 °F ...