Search
Now showing items 221-230 of 433
Modeling and analysis of a semi-active permanent magnet damper
(Texas A&M University, 1992)
Not available
Consolidation of WC-Co by simple shear
(Texas A&M University, 1999)
Equal channel angular extrusion (ECAE) has the capability of introducing large amounts of plastic strain into bulk material and powders in a fairly uniform way with the added advantage of no reduction in workpiece ...
A study of ignition and combustion characteristics of isolated coal water slurry droplet using digital image processing technique
(Texas A&M University, 1998)
A digital image processing technique is used to investigate the ignition and combustion characteristics of an isolated coal water slurry droplet in low Re flow. Coal water slurry droplet study is useful for dilute coal ...
Computational analysis of spiral groove thrust bearings and face seals
(Texas A&M University, 1997)
Analyses for incompressible and compressible spiral groove thrust bearings (SGTBS) and face seals (SGFSS) are presented. A successive approximation linearizes the partial differential equation of pressure that arises in ...
A Methdology for Baselining the Energy Use at Large Campus Utility Plants for the Purpose of Measuring Energy Savings from Energy Conservation Retrofits
(Texas A&M University, 1999)
The development of the energy services industry and the implementation of energy savings retrofits by energy services companies has increased the focus on the performance of energy saving retrofits. Energy savings measurement, ...
The effect of second phase particles in the fiber/matrix interfacial strength of carbon fiber reinforced thermoset composites
(Texas A&M University, 1996)
The fiber/matrix interfacial strength of graphite fiber reinforced epoxy (DGEBF cured with diprimary amine (9,9-bis[3-methyl-4-aminophenyl]fluorene) has been studied to determine the effect of second phase additions of ...
Structural characterization and structural/material similitude of hybrid composite tubes
(Texas A&M University, 1996)
Composites offer dramatically high stiffness to weight and strength to weight ratios which make them very desirable for use in offshore structures in deep water. In addition to high specific strength, composites offer the ...
Numerical analysis of vapor flow in a micro heat pipe
(Texas A&M University, 1996)
The vapor flow in a flat plate micro heat pipe with both uniform and linear heat flux boundary conditions has been numerically analyzed. For both types of boundary conditions, the Navier-Stokes equations with steady ...
Development of an improved sodium exposure test cell experiment for characterization of AMTEC electrode performance
(Texas A&M University, 1999)
An investigation into sources of inconsistencies in sodium exposure test cell (SETC) measurements, used to characterize AMTEC electrode performance, was conducted. Development of modifications to the SETC setup and operation ...
Low speed control of a DC motor driving a mechanical system with fuzzy adaptive compensation
(Texas A&M University, 1997)
A fuzzy adaptive feedforward control scheme in conjunction with classical feedback control is proposed for the low speed control of DC motors driving mechanical systems in the presence of friction. In the fuzzy adaptive ...