Search
Now showing items 181-190 of 433
Design implications of fiber orientation in molded thermoplastic composites
(Texas A&M University, 1991)
Not available
The Development of a Portable Data Acquisition System for Use in Commercial and Industrial Energy Audits
(Texas A&M University, 1993)
The need for a functionally advanced instrumentation and data analysis system combined with the improvements in electronics technology has led to the design of a flexible and updateable data acquisition system. This system ...
The effect of inhibitors on material and mechanical properties of oxidized carbon-carbon composites
(Texas A&M University, 1995)
The carbon-carbon laminates examined in this research program are two-dimensional, eight harness satin weaves with boron carbide (B4C) inhibitor particles and a multi-layer silicon carbide (SiC) coating. These inhibitor ...
Materials characterization of asphalt and polymer modified asphalt
(Texas A&M University, 1992)
Not available
A study of design oriented cost estimation
(Texas A&M University, 1992)
Not available
Effects of initial conditions on Rayleigh-Taylor mixing development
(Texas A&M University, 1997)
This thesis describes an experimental study of the effect of an initial disturbance on the development of Rayleigh-Taylor mixing. The experimental apparatus is a flow channel in which a heavy fluid is placed above a light ...
Active vibration isolation of a simulated engine response
(Texas A&M University, 1997)
Vibration isolation is prevalent in many industrial applications. In the automotive industry two factors arise amidst many others . cost and mass reduction. As these factors are implemented in the design of the modem ...
Heat/mass transfer distribution in rotating two-pass square channel
(Texas A&M University, 1994)
The heat/mass trasfer distribution for turbulent flow in a rotating two-pass square channel having a sharp 180' turn were investigated via the naphthalene sublimation technique. The test section models the internal cooling ...
The effects of laser trimming on the tensile strength and fatigue resistance properties of titanium - 6Al-4V
(Texas A&M University, 1994)
The effect of laser trimming on the tensile strength and fatigue resistance of titanium-6% aluminum-4% vanadium specimens was investigated. Due to the nature of laser processing, the microstructure of the titanium alloy ...