Search
Now showing items 161-170 of 433
Experimental investigation into operational characteristics of a shrouded probe for aerosol sampling
(Texas A&M University, 1992)
Not available
Theory versus experimental results and comparisons for five orifice-compensated hybrid bearing configurations
(Texas A&M University, 1992)
Not available
Mechanical properties of radial truck tires
(Texas A&M University, 1992)
Not available
Use of a unique mode switch test for the measurement of nonlinear viscoelastic shear properties of HDPE programmed-parison blow molding resins
(Texas A&M University, 1992)
Not available
Investigations in cool thermal storage: storage process optimization and glycol sensible storage enhancement
(Texas A&M University, 1993)
Within the last fifteen years, the development and utilization of cool thermal energy storage for use in building air-conditioning has witnessed a dramatic increase. Originally, research in thermal storage was rooted in ...
Software for rotordynamic analysis including flexible foundation, soil stiffness and inertia
(Texas A&M University, 1993)
Not available
Imbalance response of a rigid rotor supported on end sealed integral squeeze film dampers
(Texas A&M University, 1998)
Modern turbomachinery design directs towards the ographics. generation or utilization of increasing amounts of power with the minimum engine weight. High performance turbomachinery requires of appropriate means to ensure ...
Drop-size distribution for crosscurrent breakup of a liquid jet in a convective airstream
(Texas A&M University, 1994)
Experimental investigations have been completed in the study of a simulated fuel injector system implementing an airblast atomization process called a jet in a crossflow as the primary means of fuel atomization. To complete ...
Three dimensional thermohydrodynamic analysis of multi-lobed bearings
(Texas A&M University, 1997)
An approach for three dimensional Therinohydrodyiiamic analysis of multi-lobed journal bearings is presented. The generalized Reynolds equation solution yields the Dressure distribution in the axial and circumferential ...
Design for manufacturability: quantitative measures for design evaluation
(Texas A&M University, 1997)
In a design for manufacturing (DFM) approach, the designer has to consider the interactions between the various parameters in the design and the ease with which it can be manufactured, very early in the design process. ...