Binary mixture flammability characteristics for hazard assessment
MetadataShow full item record
Flammability is an important factor of safe practices for handling and storage of liquid mixtures and for the evaluation of the precise level of risk. Flash point is a major property used to determine the fire and explosion hazards of a liquid, and it is defined as the minimum temperature at which the vapor present over the liquid at equilibrium forms a flammable mixture when mixed with air. Experimental tests for the complete composition range of a mixture are time consuming, whereas a mixture flash point can be estimated using a computational method and available information. The information needed for mixture flash point predictions are flashpoints, vapor pressures, and activity coefficients as functions of temperature for each mixture component. Generally, sufficient experimental data are unavailable and other ways of determining the basic information are needed. A procedure to evaluate the flash point of binary mixtures is proposed, which provides techniques that can be used to estimate a parameter that is needed for binary mixture flash point evaluations. Minimum flash point behavior (MFPB) is exhibited when the flash point of the mixture is below the flash points of the individual components of the mixture. The identification of this behavior is critical, because a hazardous situation results from taking the lowest component flash point value as the mixture flash point. Flash point predictions were performed for 14 binary mixtures using various Gex models for the activity coefficients. Quantum chemical calculations and UNIFAC, a theoretical model that does not require experimental binary interaction parameters, are employed in the mixture flash point predictions, which are validated with experimental data. MFPB is successfully predicted using the UNIFAC model when there are insufficient vapor liquid data. The identification of inherent safety principles that can be applied to the flammability of binary liquid mixtures is also studied. The effect on the flash point values of three binary mixtures in which octane is the solute is investigated to apply the inherent safety concept.
Vidal Vazquez, Migvia del C. (2005). Binary mixture flammability characteristics for hazard assessment. Doctoral dissertation, Texas A&M University. Texas A&M University. Available electronically from