Show simple item record

dc.contributor.advisorWhitcomb, John
dc.creatorMaxwell, Kevin S
dc.date.accessioned2014-05-13T17:19:42Z
dc.date.available2015-12-01T06:31:12Z
dc.date.created2013-12
dc.date.issued2013-09-16
dc.date.submittedDecember 2013
dc.identifier.urihttp://hdl.handle.net/1969.1/151710
dc.description.abstractCarbon nanotubes (CNTs) have attracted much attention as reinforcements in polymer composite materials because of their unique mechanical, electrical, and thermal properties. The high electrical conductivity of CNTs is especially promising for use in multifunctional materials. Dispersing a small amount of CNTs in electrically insulating polymers has been shown to increase the conductivity of the material by many orders of magnitude because the high aspect ratio CNTs form percolating networks at very low volume fractions. Additionally, it has been shown that the application of mechanical strain to these nanocomposites results in a change in material resistivity, or piezoresistivity. Many experimental research efforts have focused on optimizing this effect for strain and damage sensing applications, but much is still unknown about the dominant mechanisms affecting piezoresistivity. The objective of this work was to develop a computational model that can predict and investigate the electrical and piezoresistive properties of CNT/polymer composites. The nanocomposites were modeled as random networks of resistors in 2D and 3D in order to understand the mechanisms that affect the percolative, electrical, and piezoresistive performance of different material systems. The model was used extensively to analyze and predict the electrical conductivity of 2D single-walled car- bon nanotube thin films and 3D multi-walled carbon nanotube (MWCNT)/polymer nanocomposites. It was found that the contact resistance between individual nanotubes greatly affects the conductivity of 2D films as well as 3D MWCNT/polymer materials. Additionally, it was shown that the electrical conductivity model could be calibrated to experimental results by adjusting the contact resistance alone. The 3D random resistor network model was also used to predict the piezoresis-tive properties for MWCNT/polymer Nano composites. The dominant mechanisms that cause the piezoresistive effect in these material systems were investigated, and the Poisson’s ratio of the composite was found to greatly impact the piezoresistive performance. The predictions indicated that decreasing the Poisson’s ratio of the composite leads to higher strain sensitivity, which could have implications for choosing material systems for strain sensor applications.
dc.format.mimetypeapplication/pdf
dc.language.isoen
dc.subjectcarbon nanotube
dc.subjectpiezoresistivity
dc.subjectnanocomposites
dc.subjectfinite elements
dc.subjectelectrical conductivity
dc.subjectresistor network
dc.subjectmultifunctional materials
dc.titleComputational Analysis of Carbon Nanotube Networks in Multifunctional Polymer Nanocomposites
dc.typeThesis
thesis.degree.departmentMaterials Science and Engineering
thesis.degree.disciplineMaterials Science and Engineering
thesis.degree.grantorTexas A & M University
thesis.degree.nameDoctor of Philosophy
thesis.degree.levelDoctoral
dc.contributor.committeeMemberLagoudas, Dimitris
dc.contributor.committeeMemberNaraghi, Mohammad
dc.contributor.committeeMemberSue, Hung-Jue
dc.type.materialtext
dc.date.updated2014-05-13T17:19:42Z
local.embargo.terms2015-12-01


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record