Search
Now showing items 71-80 of 993
Local heat transfer distribution in a triangular channel with smooth walls and staggered ejection holes
(Texas A&M University, 1999)
Transient liquid crystal experiments have been conducted to determine the distribution of the local heat transfer coefficient in a triangular channel with smooth wails and ejection holes along one or two of the wails. The ...
Friction factor data for flat plate tests of smooth and honeycomb surfaces
(Texas A&M University, 1989)
Not available
Experimental study of the effects of wakes on separation in low pressure turbine flow
(Texas A&M University, 2003)
The present study, which is the first of a series of investigations dealing with specific issues of low pressure turbine (LPT) boundary layer aerodynamics, is aimed at providing a detailed unsteady boundary flow ...
Optimal internal combustion engine tuning utilizing perturbation/correlation
(Texas A&M University, 2003)
This thesis addresses the application of the perturbation/correlation method to optimizing the torque output of internal combustion engines. This application was inspired by observations of the limitations in current ...
Heat transfer measurements in a two-pass square duct via a transient liquid crystal image method
(Texas A&M University, 2000)
In this research air flow transient heat transfer in a two-pass channel via thermochromic liquid crystals is studied. An 180° turn and rib roughened surface are part of the channel. This geometric combination simulates ...
Effect of environmental exposure on the stiffness and energy loss properties of nitrile elastomers
(Texas A&M University, 1994)
Elastomers play an important role in today's society. Elastomers, in many applications, are exposed to elevated temperatures and environments that can alter material properties. All to often the elastomer itself may be ...
A comparison of rotordynamic-coefficient predictions for annular honeycomb gas seals using different friction-factor models
(Texas A&M University, 2000)
Predictions of rotordynamic-coefficients for annular honeycomb gas seals are compared using different friction-factor models. Analysis shows that the fundamental improvement in predicting the rotordynamic-coefficients ...
A photoelastic study of the stresses at the junction of the curved and straight portions of a curved-end cantilever beam
(Texas A&M University, 1961)
Not available
An investigation of the strains in an integral type oil-well tubing joint, and the factors affecting leakage
(Texas A&M University, 1950)
Not available